0
0 items
₹0.00
No products in the cart.
- Clear filters
- Mechanical parts & measurement tools
- Power Supply, Batteries & Accessories
- Sensor Modules
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
10 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
65mm Robot Smart Car 12 Rim Wheel – Blue
In Stock
SKU:007822- 65mm diameter wheel with 25mm width for robot applications.
- Made with durable rubber for excellent traction.
- Features a sturdy nylon-reinforced plastic rim.
- Lightweight design, perfect for various terrains.
- Stylish light blue color enhances robotic designs.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female 40PCS
In Stock
SKU:007443- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Soil Moisture Sensor Module
In Stock
SKU:005185- Operating voltage: 3.3V to 5V
- Dual output mode for accuracy
- Easy installation with bolt-hole
- Power (red) and digital output (green) indicators
- LM393 comparator chip for stability
DFRobot Gravity Analog Water Pressure Sensor Module
Out of stock
SKU:009427- Measure water pressure accurately with this Arduino water sensor.
- Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
- Build smart water systems by combining with solenoid valves and other sensors.
- Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
- Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
- Perfect for IoT water pressure monitoring projects and smart home control systems.
- Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
10CM Female to Female Breadboard Jumper DuPont 2.54MM 1P-1P Cable 40 Pcs
In Stock
SKU:007437- 40P color DuPont line
- Length: 100mm
- Weight: 25 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
HMC5883L Triple Axis Compass
In Stock
SKU:009446- This compact sensor fits into small projects such as UAVs and robot navigation systems.
- The sensor converts any magnetic field to a differential voltage output on 3 axes.
- This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
- A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
W1209 Digital Temperature Controller Thermostat Module
In Stock
SKU:009233- Get full control over your project with a massive temperature range, from a freezing -50°C all the way to 110°C.
- No need to buy a separate sensor! A high-quality, waterproof temperature probe is already included in the package.
- Setting it up is very simple; just use the simple '+' and '-' buttons, no coding knowledge needed at all.
- Easily connect and control both your home AC appliances and 12V DC devices like fans, coolers, or pumps.
- Fine-tune your system perfectly with advanced options for heating/cooling modes, timer delays, and safety alarms.
- A proper device for students and DIY makers, perfect for building everything from egg incubators to automatic room coolers.
XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe
In Stock
SKU:009208- The XH-W3001 digital thermostat switch needs a supply voltage of 12V and produces a power of 120W.
- This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
- All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
- It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.
- The 12V XH-W3001 temperature controller is best used for heating control in refrigeration and suitable for seafood machines.
STC-3028 Digital Temperature Humidity Controller 110-220V
In Stock
SKU:007163- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators
Samsung INR18650-25R 2500Mah (8C) Li-Ion Battery
In Stock
SKU:006952- Brand: SAMSUNG
- Model: INR 18650 Lithium Battery
- Battery Capacity: 2500mAh
- Nominal Voltage: 3.7V
- Rechargeable: Yes
- Charging time; Standard charge 3hours/100mA deadline
- Quick charge: 1hours/100mA deadline (25 °C)

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















