0
0 items
₹0.00
No products in the cart.
DS3231 RTC Module Precise Real Time Clock I2C AT24C32
In Stock
SKU:005254- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
Out of stock
SKU:006592- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
OE-775 Hall Effect Two Channel Magnetic Encoder
Out of stock
SKU:006390BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi
Out of stock
SKU:009466- Integrates accelerometer, gyroscope, and magnetometer
- Advanced sensor fusion algorithm for accurate 9-DOF orientation data
- I2C Qwiic interface for easy plug-and-play integration
- Operating voltage: 3.3V to 5.0V
- Low power consumption for energy-efficient designs
- Compact and easy to embed in robotics, drones, IoT, and AR/VR applications
- Real-time measurement of acceleration, angular rate, and magnetic field strength
Solenoid Valve 230V 1/2 inch
In Stock
SKU:009387- Compact and convenient.
- Easily installed and serviced
- Precise and reliable.
- The installation direction can be arbitrary Angle
- Pressure-regulating valve (steady flow valve) function similar to the water flow switch
- Not only can it provide a steady flow, but it also prevents the dry burning.
- Suitable for fluids like water, oil, air.
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
SKU:006083- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
BMP280 Sensor Module
Out of stock
SKU:009507- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
DFRobot Gravity Analog Water Pressure Sensor Module
Out of stock
SKU:009427- Measure water pressure accurately with this Arduino water sensor.
- Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
- Build smart water systems by combining with solenoid valves and other sensors.
- Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
- Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
- Perfect for IoT water pressure monitoring projects and smart home control systems.
- Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
HMC5883L Triple Axis Compass
In Stock
SKU:009446- This compact sensor fits into small projects such as UAVs and robot navigation systems.
- The sensor converts any magnetic field to a differential voltage output on 3 axes.
- This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
- A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
W1209 Digital Temperature Controller Thermostat Module
In Stock
SKU:009233- Get full control over your project with a massive temperature range, from a freezing -50°C all the way to 110°C.
- No need to buy a separate sensor! A high-quality, waterproof temperature probe is already included in the package.
- Setting it up is very simple; just use the simple '+' and '-' buttons, no coding knowledge needed at all.
- Easily connect and control both your home AC appliances and 12V DC devices like fans, coolers, or pumps.
- Fine-tune your system perfectly with advanced options for heating/cooling modes, timer delays, and safety alarms.
- A proper device for students and DIY makers, perfect for building everything from egg incubators to automatic room coolers.
XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe
In Stock
SKU:009208- The XH-W3001 digital thermostat switch needs a supply voltage of 12V and produces a power of 120W.
- This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
- All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
- It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.
- The 12V XH-W3001 temperature controller is best used for heating control in refrigeration and suitable for seafood machines.
APM 2.8 Flight Controller with Built-in Compass
In Stock
SKU:007098- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
S500 HMF S550 Replacement Frame Arm(Black)
Out of stock
SKU:006616- Material: Polyamide Nylon
- Weight: 50 gm
- Size: 233 ×40 (LxW) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatible Frame: S500 & S550
S500 Carbon Fiber Quadcopter Drone Frame Kit
Out of stock
SKU:006596- High-Quality Carbon fiber Material Frame
- Comes With Landing Gear
- Power Distribution Board Pre Installed
- Easy to Assemble kit
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
In Stock
SKU:006044- Transmitter: FS-i6X (6 Channels)
- Receiver: FS-iA10B (10 Channels)
- RF Range: 2.408-2.475 GHz
- RF Power : < 20 dBm
- RF Channel: 135
- Bandwidth: 500 kHz
- Total Weight: 392 gm
- Power: 6V DC 1.5A

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















