Filter
Sort:
MT8870 DTMF Voice Decoding Module

MT8870 DTMF Voice Decoding Module

Original price was: ₹199.00.Current price is: ₹105.00.
In Stock
  • Versatile Compatibility: Works with various DTMF signals, ideal for modems, mobile radios, and more.
  • User-Friendly Design: Onboard LEDs for clear signal state and adjustable timing for accurate decoding.
  • Wide Applications: Integrates easily with Arduino boards (UNO, MEGA2560, DUE) for diverse projects.
  • Central Office Quality: Delivers excellent performance with an internal amplifier for optimal signal reception.
  • Convenient Input: Accepts both 3.5mm jack and voice input for seamless operation.
  • Multi-Channel Output: 12 dedicated outputs for phone keys (0-9, *, #) and 4 additional outputs for software control.
Add to cart
10W/15W/20W Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XYP15W

10W/15W/20W Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XYP15W

Original price was: ₹299.00.Current price is: ₹210.00.
In Stock
  1. Model: XYP15W
  2. Working voltage: DC: 8~24V
  3. Bluetooth version: 5.0
Add to cart
TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board

TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board

Original price was: ₹449.00.Current price is: ₹340.00.
In Stock
  • Original TPA3116D2 core technology
  • Easy Plug and Play Operation
  • Dynamic operating Voltage Range: 12 to 24V
  • High fidelity 120W out at both Channel
Add to cart
DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board

DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board

Original price was: ₹849.00.Current price is: ₹741.00.
In Stock
  1. Adopts two high-quality TPA3116D2 digital amplifier chips.
  2. Sound quality is very good, high efficiency and amplifying power.
  3. 50W x 2+100W  2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
  4. Powered by DC 12-24V, wide input voltage.
  5. User can adjust the volume by themselves easily.
  6. Applicable speaker impedance: 4-8 ohm.
Add to cart
XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board

XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board

Original price was: ₹199.00.Current price is: ₹118.00.
In Stock
  1. Original TPA3110 core technology
  2. Easy Plug and Play Operation
  3. Dynamic operating Voltage Range: 12 to 24V
  4. High fidelity Dual 30W output.
Add to cart
4A DC-DC Step-down Adjustable Constant Voltage Module

4A DC-DC Step-down Adjustable Constant Voltage Module

Original price was: ₹249.00.Current price is: ₹199.00.
In Stock
  1. 1. High-power LED driver.
  2. Input voltage Min- 7V
  3. Input voltage Max-40V
  4. Lithium battery(or lead accumulator) charge.
  5. Vehicle-mounted power supply.
  6.  Low voltage system power supply.
  7.  6V, 12V, 14V, 24V battery charge.
  8.  On-board laptop power supply.
  9. Regulated power supply.
  10. Low voltage power supply system
Add to cart
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A

1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A

Original price was: ₹999.00.Current price is: ₹787.00.
In Stock
  1. Input voltage :10-60V
  2. Output voltage: 12-83V (adjustable)
  3. Output Current: 12A
  4. Input Current: 20A
  5. The non-isolated step-up power conversion module
  6. Onboard LED illuminates when the voltage is applied to the module
  7. Equips Multi-turn Potentiometer.
Add to cart
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

Original price was: ₹149.00.Current price is: ₹75.00.
In Stock
  1. Output Current: 1.5A (minimum), 2.2A (typ)
  2. Input and output voltage difference (VI-VO): 40Vdc (max)
  3. Adjustable output voltage range: 1.2 ~ 37V
  4. Operating temperature: -55 to +150
  5. Output Current: 1.5A
  6. Input voltage: 4.2 ~ 40 V
Add to cart
220V AC 2000W SCR Voltage Regulator Motor Speed Controller

220V AC 2000W SCR Voltage Regulator Motor Speed Controller

Original price was: ₹149.00.Current price is: ₹76.00.
In Stock
SKU: AE1020
  1. This is 2000W 220V AC Motor Speed Controller Voltage Regulator
  2. This voltage regulator uses novel bi-directional high-power SCR.
  3. The input voltage of this voltage regulator can be between 110V ~ 220V AC
  4. The output voltage:50V-220V(Output voltage < = Input supply voltage)
  5. The maximum output power is 2000W and the maximum output current is 25A
  6. The size of this SCR is 1.85x1.38x1 inches
  7. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  8. This has High efficiency, high torque, low heat generating
Add to cart
SD Card Module

SD Card Module

Original price was: ₹59.00.Current price is: ₹37.00.
In Stock
  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
  • Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
  • MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
Add to cart
5V 16 Channel Relay Module

5V 16 Channel Relay Module

Original price was: ₹720.00.Current price is: ₹526.00.
In Stock
  • Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
  • Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
  • Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
  • Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
  • Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
  • Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
  • Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
Add to cart
12V 4CH Relay Board

12V 4CH Relay Board

Original price was: ₹245.00.Current price is: ₹143.00.
In Stock
  • Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
  • Electromagnetic relays are employed for the protection of various ac and dc equipment.
  • The over/under current and voltage protection of various ac and dc equipment.
Add to cart
2 CH 12V Relay Board

2 CH 12V Relay Board

Original price was: ₹99.00.Current price is: ₹74.00.
In Stock
  • The board is a 2 channel relay which works on 12V.
  • The input signal can come directly from a microcontroller.
  • Each relay can switch the variety of AC or DC high voltage.
  • Current loads working at 110V or 220V AC mains like lights, fans, motors and such
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

₹399,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

₹259,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart

Filter Products

Categories

Filter by price

Product Status