6
6 items
₹420,158.00
Subtotal: ₹420,158.00
Hurray! Your order qualifies for free shipping!
6
Subtotal: ₹420,158.00
Hurray! Your order qualifies for free shipping!
“3DPrintMill(CR 30) 3D Printer” has been added to your cart. View cart
- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 433 MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
- Frequency: 125Khz.
- Support μEM4001, 4100, or its compatible RFID, ID card.
- Read first 10 digits of the RFID/Proximity card.
- Support Windows95/98/2000/XP/7/8.
- Plug and Play
- Reliable working condition
- Powered directly from USB, no need external power supply
- Power supply: DC 6.5-16v and USB 5V
- GVS output power supply: 5V or 3.3V
- No. Of Pins: 30PIN
- Processor Count: 2
- Power: 5V or 3.5–4.5V
- Supports 2G, 3G, 4G SIM cards
- TTL serial port (3.3V/5V)
- SMA antenna interface
- Flip SIM slot
- ESD protection
- AT command support
- Ideal for IoT & GPS tracking
- Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
- The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
- Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
- Onboard Wifi module RST reset button
- 1MB (8Mbit) Flash size.
- Very competitive price
- AP, STA, AP+STA modes available.
- Very simple AT commands, easy to use.
- Internal LWIP interface.
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Processor: ESP32-C6 SoC with two 32-bit RISC-V processors (High-Performance and Low-Power).
- Memory: 512KB SRAM and 4MB Flash on-chip.
- 2.4GHz Wi-Fi 6 (802.11ax)
- Bluetooth 5.0 (LE)
- Zigbee
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Supply Voltage: 2.2 V ~ 3.6 V
- GPIO Pins: 38
- Current: 80 mA
- Data Rate: 54 Mbps.
- Flash Memory: 32Mbits
- Frequency: 2.4 GHz.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.