9
9 items
₹229,783.00
Subtotal: ₹229,783.00
Hurray! Your order qualifies for free shipping!
9
Subtotal: ₹229,783.00
Hurray! Your order qualifies for free shipping!
“Creality Ender 3 V3 3D Printer” has been added to your cart. View cart
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
F450 F550 Replacement Frame Arm (White)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
F450 F550 Replacement Frame Arm (Red)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
KK board 2.1.5 Multi-Rotor LCD Flight Control Board
In Stock
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
A2212 2450KV BLDC Motor for RC Drones and Quadcopters
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
F450/F550 Quadcopter High Landing Gear
In Stock
- Color: black
- Material: ABS Plastic
- The span of the bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit
In Stock
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
Standard 30A BLDC ESC Electronic Speed Controller with Connector
In Stock
- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 3A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
Simonk Red ESC 30A without Connector for Quadcopter
In Stock
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















