“DC Motor – 60RPM – 12Volts” has been added to your cart. View cart
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable
In Stock
- Output Current: 1.5A (minimum), 2.2A (typ)
- Input and output voltage difference (VI-VO): 40Vdc (max)
- Adjustable output voltage range: 1.2 ~ 37V
- Operating temperature: -55 to +150
- Output Current: 1.5A
- Input voltage: 4.2 ~ 40 V
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
- The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
- Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
- MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
5V 16 Channel Relay Module
In Stock
- Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
- Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
- Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
- Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
- Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
- Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
- Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
This product is available on backorder. Lead time will be 50 days.
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- Voltage Range: 100-120 V
This product is available on backorder. Lead time will be 50 days.
- 3-in-1: 3D printing, 10W laser, pen drawing
- Multi-material: Flexible, rigid, exotic filaments
- Precise laser: 0.3mm alignment, cuts up to 5mm
- Fast printing: Up to 600mm/s, 350°C hotend
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
This product is available on backorder. Lead time will be 50 days.
- Multi-material printing – Flexible, rigid, and exotic filaments.
- High-speed – Up to 600 mm/s with 350°C hotend.
- Large build volume – Max 350 × 320 × 325 mm³.
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
In Stock
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
5V Single Channel RELAY Module
In Stock
- ontrol Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.