“2 X 18650 Black Battery Holder with DC Power Plug” has been added to your cart. View cart
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
This product is available on backorder. Lead time will be 50 days.
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- Voltage Range: 100-120 V
This product is available on backorder. Lead time will be 50 days.
- 3-in-1: 3D printing, 10W laser, pen drawing
- Multi-material: Flexible, rigid, exotic filaments
- Precise laser: 0.3mm alignment, cuts up to 5mm
- Fast printing: Up to 600mm/s, 350°C hotend
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
This product is available on backorder. Lead time will be 50 days.
- Multi-material printing – Flexible, rigid, and exotic filaments.
- High-speed – Up to 600 mm/s with 350°C hotend.
- Large build volume – Max 350 × 320 × 325 mm³.
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
12V 60 RPM Side Shaft High Torque Motor (Original & new)
In Stock
5V 4 phase Stepper Motor 28YBJ-48 with ULN2003 Driver Board Grade A High Quality
In Stock
Reprap A4988 stepper motor driver 3D Printer + heat sink with sticker
In Stock
TowarPro MG996R Digital High Torque Servo Motor Metal Gear 180° and 360°
In Stock
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.