“Raspberry Pi 5 Model 8GB” has been added to your cart. View cart
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable
In Stock
- Output Current: 1.5A (minimum), 2.2A (typ)
- Input and output voltage difference (VI-VO): 40Vdc (max)
- Adjustable output voltage range: 1.2 ~ 37V
- Operating temperature: -55 to +150
- Output Current: 1.5A
- Input voltage: 4.2 ~ 40 V
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
- The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
- Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
- MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
P45 Small Float Level Control Switch Plastic Float Switch
In Stock
- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.
5V 16 Channel Relay Module
In Stock
- Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
- Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
- Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
- Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
- Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
- Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
- Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
GY-302 BH1750 Light Intensity Module
In Stock
- No ambient light distinction
- High precision determination accurate to 1 Lux for different lights
- ROHM original package BH1750FVI chip
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interfac
OE-775 Hall Effect Two Channel Magnetic Encoder
In Stock
801S Vibration Shock Sensor Module
In Stock
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
Multi Coin Acceptor Programable for Vending Machines
In Stock
HC-SR04 Ultrasonic range finder with cartoon Ultrasonic Sensor mounting Bracket
In Stock
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 4500 cm
- Frequency: 40 KHz
- Thickness: 2.8-3.1 mm
- The diameter of mounting hole: 3.8mm
- Mounting Bracket Material: acrylic
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
In Stock
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
5V Single Channel RELAY Module
In Stock
- ontrol Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
LM35 Temperature Sensors
In Stock
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.