Filter
Sort:
30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board

30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board

₹125.00
In Stock
  1. Power supply: DC 6.5-16v and USB 5V
  2. GVS output power supply: 5V or 3.3V
  3. No. Of Pins: 30PIN
  4. Processor Count: ‎2
Add to cart
SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna

SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna

₹469.00
In Stock
  • Power: 5V or 3.5–4.5V
  • Supports 2G, 3G, 4G SIM cards
  • TTL serial port (3.3V/5V)
  • SMA antenna interface
  • Flip SIM slot
  • ESD protection
  • AT command support
  • Ideal for IoT & GPS tracking
Add to cart
AC90-250V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply

AC90-250V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply

₹675.00
In Stock
  1. Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
  2. The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
  3. Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
  4. Onboard  Wifi module RST reset button
Add to cart
Purple Esp32 38pin Expansion Board

Purple Esp32 38pin Expansion Board

₹142.00
In Stock
  1. Item: ESP32S 38pin Expansion Card
  2. Material: ABS+Metal
  3. Color: Purple
  4. Interface: Type C
Add to cart
ESP32 38PIN expansion board

ESP32 38PIN expansion board

₹120.00
In Stock
Add to cart
Ai Thinker ESP-01S ESP8266 WiFi Module

Ai Thinker ESP-01S ESP8266 WiFi Module

₹185.00
In Stock
  1. 1MB (8Mbit) Flash size.
  2. Very competitive price
  3. AP, STA, AP+STA modes available.
  4. Very simple AT commands, easy to use.
  5. Internal LWIP interface.
Add to cart
RC522 RFID 13.56MHZ Reader Writer Module

RC522 RFID 13.56MHZ Reader Writer Module

₹70.00
In Stock
  1. Voltage: DC 3.3V (Do not use 5V supply)
  2. Operating Current :13-26mA
  3. Idle Current :10-13mA
  4. Operating Frequency: 13.56MHz
  5. Highly integrated analog circuitry to demodulate and decode responses
  6. Supports ISO/IEC 14443 A/MIFARE
Add to cart
Seeed Studio XIAO ESP32C6

Seeed Studio XIAO ESP32C6

₹835.00
In Stock
  1. Processor: ESP32-C6 SoC with two 32-bit RISC-V processors (High-Performance and Low-Power).
  2. Memory: 512KB SRAM and 4MB Flash on-chip.
  3. 2.4GHz Wi-Fi 6 (802.11ax)
  4. Bluetooth 5.0 (LE)
  5. Zigbee
Add to cart
ESP8266 NodeMCU CP2102 WiFi Board Development Board

ESP8266 NodeMCU CP2102 WiFi Board Development Board

₹256.00
In Stock
  1. Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
  2. Arduino-like hardware IO
  3. Integrated TR switch, balun, LNA, power amplifier and matching network
  4. Integrated PLL, regulators, DCXO and power management units
  5. Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
  6. Embeds logic level converter circuits
Add to cart
NEO-M8N GPS Module with Ceramic Active Antenna

NEO-M8N GPS Module with Ceramic Active Antenna

₹695.00
In Stock
Add to cart
ESP WROOM 32 Wi-Fi Bluetooth Development Board -30 pin

ESP WROOM 32 Wi-Fi Bluetooth Development Board -30 pin

₹450.00
In Stock
  1. Supply Voltage: 2.2 V ~ 3.6 V
  2. GPIO Pins: 38
  3. Current:  80 mA
  4. Data Rate: 54 Mbps.
  5. Flash Memory: 32Mbits
  6. Frequency: 2.4 GHz.
Add to cart
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

₹37.00
In Stock
  1. Voltage: 3.3 – 5V.
  2. Ports: Digital Level.
  3. Output load voltage: 0-24 V.
  4. Output load current: <5A (1A above need to add heat sink).
  5. Platform: Arduino, MCU, ARM, raspberry pi.
Add to cart
5V Single Channel RELAY Module

5V Single Channel RELAY Module

₹31.00
In Stock
  1. ontrol Signal: Works with 5V TTL signals.
  2. Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
  3. Relay Rating: Supports 5A at 240V AC.
  4. LED Indicator: Shows when the relay is ON.
  5. Wiring: 2×3-pin male header for easy connections.
Add to cart
1.3 inch I2C OLED Display Module 4pin Blue Color

1.3 inch I2C OLED Display Module 4pin Blue Color

₹314.00
In Stock
  1. Driver IC: SH1106
  2. Resolution: 128 x 64
  3. Visual Angle: >160°
  4. Input Voltage: 3.3V ~ 6V
  5. Pixel Color: Blue
   
Add to cart
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color

0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color

₹159.00
In Stock
  1. Driver IC: SSD1306
  2. Resolution: 128 x 64
  3. Visual Angle: >160°
  4. Input Voltage: 3.3V ~ 6V
  5. Only Need 2 I/O Port Control

   
Add to cart
Original JHD539 16×4 Character LCD Display With White Backlight

Original JHD539 16×4 Character LCD Display With White Backlight

₹408.00
In Stock
Add to cart

Filter Products

Categories

Filter by price

Product Status