“M274 360 Degree Rotary Encoder” has been added to your cart. View cart
- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
NEO-6M GPS Module with EPROM
In Stock
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0
In Stock
- Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
- Supports Wi-Fi & Bluetooth 5.0 connectivity
- Built-in 2.4GHz rod antenna for a stable signal
- Ultra-low power consumption with deep sleep mode (14μA)
- Integrated lithium battery charging management
- Compact ESP32 S3 development board ideal for IoT and robotics
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
In Stock
- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio
In Stock
- Smart AI vision camera solution for edge AI applications
- Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
- Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
- Supports TensorFlow & PyTorch frameworks
- Compatible with Arduino IDE for easy development
- No-code model deployment and real-time inference visualization via SenseCraft AI
- Comes in a custom 3D-printed enclosure
Seeed Studio XIAO RP2040 Development Board Supports Arduino,
In Stock
- Compact and Arduino-compatible development board based on Raspberry Pi RP2040
- Thumb-sized, surface-mount design for space-saving applications
- Supports Arduino, MicroPython, and CircuitPython programming
- Ideal for learning coding, electronics, and prototyping
- Cost-effective solution with a wide range of compatible libraries
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++
In Stock
- Compact development board powered by Raspberry Pi RP2350
- Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
- Supports MicroPython, C, and C++ development
- 19 multifunction GPIOs, RGB LED, and Battery Management System
- Ultra-low power consumption (27μA) with battery power supply
- Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0
In Stock
- Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
- Bluetooth 5.0
- Wireless connect
- Onboard 2 MB flash
- Embedded machine learning projects
GSM SIM800C Modem with Antenna
In Stock
- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32
TTGO T-Call V1.4 ESP32 SIM800L Wireless Communication Module
In Stock
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
RF433 MHz Transmitter Receiver Wireless Module
In Stock
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
RF Transmitter Receiver Module 433MHz Wireless Link Kit
In Stock
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 433 MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader
In Stock
- Frequency: 125Khz.
- Support μEM4001, 4100, or its compatible RFID, ID card.
- Read first 10 digits of the RFID/Proximity card.
- Support Windows95/98/2000/XP/7/8.
- Plug and Play
- Reliable working condition
- Powered directly from USB, no need external power supply
30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board
In Stock
- Power supply: DC 6.5-16v and USB 5V
- GVS output power supply: 5V or 3.3V
- No. Of Pins: 30PIN
- Processor Count: 2
SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna
In Stock
- Power: 5V or 3.5–4.5V
- Supports 2G, 3G, 4G SIM cards
- TTL serial port (3.3V/5V)
- SMA antenna interface
- Flip SIM slot
- ESD protection
- AT command support
- Ideal for IoT & GPS tracking
AC90-250V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply
In Stock
- Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
- The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
- Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
- Onboard Wifi module RST reset button

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















