0
0 items
₹0.00
No products in the cart.
4 CHANNEL USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
In Stock
SKU:006903- Input voltage: 6~32V
- Type: 6-32V DC-DC Buck Converter Step Down to Fast Quick Charger Circuit Board
- Material: Metal + Plastic
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Output voltage cable compensation function
- Conversion efficiency: 90%-97%
PDC004-PD PD decoy module 9V
In Stock
SKU:006896- 9V DC Operation
- USB Power Delivery
- Simulates PD Negotiation
- Overcurrent protection
- USB PD system testing
- Compact Design
5V 2 Channel Relay Module
In Stock
SKU:006792- 2 Channels
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Each relay features an LED indicator.
- Dimensions: 51 x 39 x 18mm (Length x Width x Height)
PS2 Joystick Module Breakout Sensor
In Stock
SKU:006768- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
Water Level Detection Sensor Module, Red PCB Board with Parallel Strips
In Stock
SKU:006763 Item Weight: 50 g
Product Dimensions:6 x 2 x 0.2 cm; 50 g
Item part number :Wls-001
Item Height:0.2 Centimeters
Item Width: 2 Centimeters
Add to cart
5V 8 Channel SSR Module
In Stock
SKU:006757- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 V AC.
- Good for lighting, Holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with large current.
- It can be controlled directly by a Microcontroller.
5V 1 Channel SSR Module
In Stock
SKU:006752- 1-Channel Solid-State Relay
- Rated output load: 100V ~ 240V AC (50Hz/ 60Hz) 2A per channel
- Rated input voltage: 5V
- Triggered at Low level
- Separate LEDs showing the status of each Solid-State Relay
5V 2 Channel SSR Module
In Stock
SKU:006747- 2-Channel Solid-State Relay
- Rated output load: 100V ~ 240V AC (50Hz/ 60Hz) 2A per channel
- Rated input voltage: 5V
- Triggered at Low level
- Separate LEDs showing the status of each Solid-State Relay
LM386 Audio Amplifier Module
In Stock
SKU:006741- Onboard LM386 Chip.
- 200 multiplier benefits circuit design.
- On-board speaker wiring Block.
- On-board 10K variable resistor, you can adjust the volume of the enlarged.
- Onboard power indicator.
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A
In Stock
SKU:006731- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable
In Stock
SKU:006712- Output Current: 1.5A (minimum), 2.2A (typ)
- Input and output voltage difference (VI-VO): 40Vdc (max)
- Adjustable output voltage range: 1.2 ~ 37V
- Operating temperature: -55 to +150
- Output Current: 1.5A
- Input voltage: 4.2 ~ 40 V
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter
In Stock
SKU:006699- Working voltage: DC 9V–36V
- Output voltage: 5.2V/5A/25W
- 9~24V input: Output 5.2V/6A/30W
- 24~32V input: output 5.2V/5A/25W
- 32~36V input: output 5.2V/3.5A/18W
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU:006689 SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
- The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
- Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
- MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
5V 16 Channel Relay Module
In Stock
SKU:006656- Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
- Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
- Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
- Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
- Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
- Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
- Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
2 CH 12V Relay Board
In Stock
SKU:006646- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















