0
0 items
₹0.00
No products in the cart.
Male to Female Jumper Wires 40Pcs 20cm
In Stock
SKU:007425- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
In Stock
SKU:007155- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model: NCR18650 B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V AC 100V ~ 240V 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Add to cart
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester Rated 5.00 out of 5 based on 1customer rating
In Stock
SKU:006787- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- nput Voltage: 220V AC.
- Maximum Power: 4000W.
- Adjustable Voltage: 0-220V AC.
- AC frequency: 50-60Hz.
- lightweight
- convenient to carry This battery box holder with wires
- suitable for 2 x AA batteries With spring clip design
- Wire Length(mm):140
- Weight(g):5(each)
- Material: Plastic
- Output Voltage(V): 9
- ON/OFF Switch: NO
- Cable Length: 15 cm
- Color: Black
- Dimensions in mm (LxWxH): 68 x 33 x 20
- Weight (gm): 18

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















