Filter
Sort:
Official Arduino MKR WAN 1310 ABX00029

Official Arduino MKR WAN 1310 ABX00029

Original price was: ₹6,499.00.Current price is: ₹3,497.00.
In Stock
SKU:007260
  1. Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
  2. Radio module: CMWX1ZZABZ
  3. Board Power Supply: (USB/VIN) 5V
  4. Secure Element: ATECC508
Add to cart
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno

3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno

Original price was: ₹1,399.00.Current price is: ₹1,216.00.
In Stock
SKU:007239
  1. 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
  2. It can control the backlight to connect the transistor to a digital pin
  3. 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
  4. 4-wire resistive touchscreen
  5. 8-bit digital interface, plus 4 control lines
Add to cart
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

Original price was: ₹1,299.00.Current price is: ₹857.00.
In Stock
SKU:007221
  1. Good high-speed performance
  2. Supply voltage up to +50VDC
  3. Output current up to 4.2A
  4. Pulse frequency up to 300 KHz
  5. Automatic idle-current reduction
  6. 3-state current control technology
  7. Self-adjustment technology
  8. Pure-sinusoidal current control technology
Add to cart
L293D Motor Driver/Servo Shield for Arduino

L293D Motor Driver/Servo Shield for Arduino

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
SKU:007172
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
4.8-6V Servo Motor Tester

4.8-6V Servo Motor Tester

Original price was: ₹149.00.Current price is: ₹87.00.
In Stock
SKU:007139
  • This is 4.8-6V Servo Motor Tester
  • This offer 3 modes to check servos or ESC
  • This servo motor tester connect to up to 3 servos simultaneously
  • This can connect up to 3 ESCs to test and compare their reaction time respectively
  • This servo motor tester is built with LED indicators
Add to cart
Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

Original price was: ₹1,099.00.Current price is: ₹990.00.
In Stock
SKU:007123
  1.  Maximum current: 7.2A, resolution: 0.1A
  2.  Impulse response frequency: 200KHz
  3.  DC power supply
  4.  The input voltage range: 20-50 VDC.
  5.  Power supply is greater than 200W. Recommend 20-50 VDC
  6.  Operating Temperature: -10℃~45℃
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
SKU:007116
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
Official Arduino Uno R3 SMD Microcontroller Board – A000073

Official Arduino Uno R3 SMD Microcontroller Board – A000073

Original price was: ₹2,499.00.Current price is: ₹1,837.00.
In Stock
SKU:007108
  • Microcontroller board featuring an ATmega328P in an SMD package
  • Provides 14 digital input/output pins, with 6 capable of PWM output
  • Includes 6 analog input pins for reading sensor data
  • Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
  • Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
  • Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
  • The SMD Arduino Uno version of the popular Arduino Uno board
Add to cart
Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Original price was: ₹349.00.Current price is: ₹217.00.
In Stock
SKU:007076
  • This is the Uno R3 CH340G Development Board with Micro USB port compatible with Arduino
  • This UNO R3 board is based on ATmega328p microcontroller.
  • This board comes with a Micro USB port for powering the board.
  • This board has an operating voltage of 5V and features a 14 digital I/O pins.
  • The UNO board is integarted with 6 analog pins and 32Kb flash memory.
Add to cart
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

Original price was: ₹149.00.Current price is: ₹118.00.
In Stock
SKU:007026
  • Module PCB size: 3.6cm * 2.3cm
  • PCF8591 operating voltage range of 2.5V to 6V
  • 4 analog inputs programmable as single-ended or differential inputs
  • VCC power supply interface external 3.3v-5v
  • 8-bit successive approximation A / D converter through an analog output DAC gain
Add to cart
RS555 6000RPM 12V Dc Motor

RS555 6000RPM 12V Dc Motor

Original price was: ₹249.00.Current price is: ₹208.00.
In Stock
SKU:006849
  • Voltage: 12V
  • RPM: 6000 approx.
  • Amp Rating: 2 Amp (max 5 Amp)
Add to cart
D Shaft 775 12V 12000 RPM/MIN High Speed High Torque DC Motor Dual Shaft

D Shaft 775 12V 12000 RPM/MIN High Speed High Torque DC Motor Dual Shaft

Original price was: ₹699.00.Current price is: ₹469.00.
In Stock
SKU:006841
Voltage: 12V DC. Speed:  12000 RPM for high-speed performance. Applications: Ideal for robotics, automation, DIY projects, power tools, hobbyist projects, and educational demonstrations. Reliable Performance. Versatility: Perfect for projects demanding both speed and torque.
Add to cart
TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality

TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality

Original price was: ₹349.00.Current price is: ₹237.00.
In Stock
SKU:006826
  1. Model: MG995
  2. Weight: 55 gm
  3. Operating voltage: 4.8V~ 7.2V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 10 kg-cm
  6. Stall torque @6.6V : 12 kg-cm
Add to cart
PCA9685 16 Channel Servo Motor Drive

PCA9685 16 Channel Servo Motor Drive

Original price was: ₹449.00.Current price is: ₹219.00.
In Stock
SKU:006721
  • This is PCA9685 16 Channel Servo Motor Driver(Soldered)
  • The operating voltage: 2.3V to 5.5V
  • This has 5.5V tolerant inputs
  • This can operate at minus 40 degrees Celsius to 85 degrees Celsius
  • Software reset feature (SWRST Call) allows the device via I2C bus reset
  • 25MHz internal oscillator requires no external components
  • The maximum allowable 50MHz external clock input
Add to cart
Raspberry Pi USB Plug and Play Desktop Microphone

Raspberry Pi USB Plug and Play Desktop Microphone

Original price was: ₹349.00.Current price is: ₹177.00.
In Stock
SKU:006708
  1. USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
  2. Designed to filter out background noises for crisp, clear audio
  3. Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
  4. Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
  5. Flexible neck to adjust your convenient direction and Height for talking.
Add to cart
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

Original price was: ₹299.00.Current price is: ₹219.00.
In Stock
SKU:006481
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
  • Configurable push-pull or an open-drain output
  • The output enable pin to quickly disable all the outputs
  • Terminal block for power input
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
Add to cart

Filter Products

Categories

Filter by price

Product Status