0
0 items
₹0.00
No products in the cart.
NE555 Delay Monostable Switch Module Time Delay 12V
Out of stock
SKU:008516- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W
1 channel 5V 10A Relay Control Board Module with Optocoupler
Out of stock
SKU:008505- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
4 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
Out of stock
SKU:008500- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
6-30V 1-Channel Power Relay Module with Adjustable Timing
Out of stock
SKU:008496- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
5-36v Switch Drive High-power MOSFET Trigger Module
Out of stock
SKU:008492 This 5-36v Switch Drive High-power MOSFET Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, PWM, motor speed control, lamp brightness. etc.
Read more
D4184 Mosfet control Module Replacement Relay
Out of stock
SKU:008486- Model: D4184
- MOS tube: 40V 50A
- Dimensions: 23mm X 16mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
5V Dual Channel Relay Module with Optocoupler
Out of stock
SKU:008481- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
Waveshare 4.3inch DSI LCD Capacitive Touch Display 800×480 for Raspberry Pi
In Stock
SKU:008191-
4.3-inch capacitive touch display with 800×480 resolution for Raspberry Pi
-
Connects directly to Raspberry Pi via DSI interface for easy setup
-
Supports 5-point multi-touch for interactive projects
-
Compatible with Raspberry Pi 4B/3B+/3B/Zero W/Zero 2 W models
-
Built-in backlight control for adjustable brightness
-
Plug and play design with no additional drivers needed
-
Includes protective case for durability and mounting
Waveshare 2-Channel CAN FD HAT Raspberry Pi Expansion Board
In Stock
SKU:008182- Waveshare CAN FD HAT adding 2-channel CAN bus capabilities to Raspberry Pi.
- Supports both traditional CAN 2.0 and high-speed CAN FD protocols.
- Standard Raspberry Pi 40PIN GPIO, compatible with Raspberry Pi series and Jetson Nano.
- Multi-protection circuits: 5KV electrical isolation, 500W lightningsurge, ESD, and short circuit protection.
- Features MCP2518FD CAN controllers and SPI control bus.
- Onboard voltage translator (3.3V/5V) and 120Ω terminal resistor, configurable via jumpers.
- Ideal Raspberry Pi CAN FD HAT for automotive and industrial automation.
Official Raspberry Pi Zero
Out of stock
SKU:008177- Small, affordable single-board computer.
- 1GHz CPU and 512MB RAM.
- Mini HDMI® and micro USB OTG ports.
- 40-pin HAT-compatible header.
- Composite video, reset headers, and CSI camera connector.
Raspberry Pi Pico W Ultimate Kit with Manual
Out of stock
SKU:008172- This Raspberry Pi Pico W Ultimate kit is very useful and helpful for kids who are interested in getting started with technology.
- This Ultimate kit includes Raspberry Pi Pico W with Headers, micro USB cable, soil and moisture sensor, rain sensor, mini pump, DHT11 module, 5V 1 Channel Relay module, 16x2 LCD with I2C Module, MQ135 Gas Sensor, RGB CC LED, BMP180 pressure sensor and Buzzer Module.
- Along with the Raspberry Pi Pico W kit components, you will also get a manual that includes 10 experiments and step by step guide to them.
Official Raspberry Pi 4 8gb Starter Kit with 7 inch Touchscreen Display
In Stock
SKU:008162- Powerful Performance: 8GB RAM Raspberry Pi 4 Model B - ideal for beginners and enthusiasts, powerful processor ensures smooth operation.
- Perfect for building your own computer: Includes everything you need - Raspberry Pi 4 board, official 7" touchscreen display, case, power adapter, HDMI cable, and 32GB MicroSD card.
- Official Touch Display: Enjoy a responsive 7" touchscreen display (800x480 pixels) for intuitive control. Great for browsing, gaming, and multimedia applications.
- Durable Case: High-quality case with dual cooling fans keeps your Raspberry Pi cool and protected. Ideal for extended use and overclocking.
- Easy to Use & Maintain: Designed for beginners and enthusiasts. Get started quickly with the included accessories and online resources. Perfect for learning programming, electronics, and building your own projects.
- Keyboard and mouse are not included in this kit. We recommend get them separately.
Raspberry Pi 5 27W USB-C Power Supply White Colour
In Stock
SKU:008151- Fast Charging: Official 27W USB-C PD Power Supply for Raspberry Pi 5 delivers 5.1V, 5A for efficient charging.
- Versatile Output: Provides 3A @ 9V, 2.25A @ 12V, and 1.8A @ 15V for various devices.
- Dynamic Design: Improved design with high-quality 18 AWG 1.2m cable in White.
- Multiple Use Cases: Ideal for powering Raspberry Pi 5 and other PD-compatible products.
- Reliable Brand: Raspberry Pi ensures top-notch quality and durability.
- Suitable for All Ages: Perfect for tech enthusiasts of all ages.
Raspberry Pi Pico W with Headers Soldered and USB Cable
In Stock
SKU:008146- Raspberry Pi Pico W powered by RP2040 system-on-chip (SoC).
- Based on two Arm Cortex-M0+ cores running at 133MHz.
- Features 2MB of onboard flash storage, 264kB of RAM, and 40 pins.
- Includes three analog inputs and the unique Programmable I/O subsystem.
- Features onboard Wi-Fi connectivity to use in a variety of exciting IoT projects.
- Features fast cores, large memory, and flexible interfacing.
- 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels.
- 8×Programmable IO (PIO) state machines for custom peripheral support.
- You will get 1 year warranty against manufacturing defects.
Raspberry Pi 3 Model A+
In Stock
SKU:008140- A 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
- 512MB LPDDR2 SDRAM
- Dual-band 802.11ac wireless LAN and Bluetooth 4.2/BLE
- Improved USB mass-storage booting
- Improved thermal management.
- Robocraze is the approved sellers of Raspberry Pi products in India and you can buy the Raspberry Pi 3 Model A+ boards at best prices.
Official Raspberry Pi Pico 2
In Stock
SKU:008135- Dual Cortex-M33 or Hazard3 processors at 150MHz.
- 520 KB on-chip SRAM.
- Compatible with Raspberry Pi Pico 1.
- Drag-and-drop USB programming.
- Castellated module for easy soldering.
- Robust security features with boot signing.
- 2 × UART, 2 × SPI, 2 × I2C, 24 × PWM, and 4 × ADC.
- USB 1.1 controller with host/device support.
- 12 PIO state machines.
- Open-source SDK and MicroPython support.
- Operating temp: -20°C to +85°C.
- Input voltage: 1.8–5.5V DC.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















