0
0 items
₹0.00
No products in the cart.
Seeed Studio XIAO ESP32C6
Out of stock
SKU:005618- Processor: ESP32-C6 SoC with two 32-bit RISC-V processors (High-Performance and Low-Power).
- Memory: 512KB SRAM and 4MB Flash on-chip.
- 2.4GHz Wi-Fi 6 (802.11ax)
- Bluetooth 5.0 (LE)
- Zigbee
Raspberry Pi 5 Model 4GB
Out of stock
SKU:005412Raspberry Pi 4 Model-B with 8 GB RAM
Out of stock
SKU:005339Raspberry Pi 4 Model B with 2 GB RAM
Out of stock
SKU:005336Raspberry Pi 4 Model-B with 4 GB RAM
Out of stock
SKU:005328Raspberry Pi 3 Model B+
In Stock
SKU:005311Nano 328P Expansion Adapter Breakout Board IO Shield
In Stock
SKU:005150- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
- Made in India 32-bit Arduino board.
- Renesas R7FA4M1AB3CFM, 48 MHz Cortex®-M4 processor.
- 256 kB Flash, 32 kB SRAM, 8 kB EEPROM.
- Compatible with older Arduino UNO shields.
- Advanced peripherals: ADC, DAC, RTC, CAN bus.
- Supports 6-24 V input and USB-C® power.
Node MCU ESP8266 with CP2102 USB-Serial Interface
In Stock
SKU:005052- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
Official Raspberry Pi Ai Camera- Built With Sony IMX500 Sensor
In Stock
SKU:005036- Sensor: 12MP Sony IMX500 Intelligent Vision Sensor
- Integrated low-power inference engine
- Pre-loaded with MobileNet machine vision model
- 76-Degree field of view
- F1.79 Focal Ratio
- Manually adjustable focus
7Semi Mini ATmega328P Board – 5V
In Stock
SKU:005016- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
SKU:005009Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
SKU:005003- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
SKU:004996- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
SKU:004985- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.













