0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
Raspberry Pi 4 Model B with 2 GB RAM
Out of stock
SKU:005336Raspberry Pi 4 Model-B with 4 GB RAM
Out of stock
SKU:005328Raspberry Pi 3 Model B+
In Stock
SKU:005311Nano 328P Expansion Adapter Breakout Board IO Shield
In Stock
SKU:005150- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
- Made in India 32-bit Arduino board.
- Renesas R7FA4M1AB3CFM, 48 MHz Cortex®-M4 processor.
- 256 kB Flash, 32 kB SRAM, 8 kB EEPROM.
- Compatible with older Arduino UNO shields.
- Advanced peripherals: ADC, DAC, RTC, CAN bus.
- Supports 6-24 V input and USB-C® power.
Node MCU ESP8266 with CP2102 USB-Serial Interface
In Stock
SKU:005052- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
Official Raspberry Pi Ai Camera- Built With Sony IMX500 Sensor
In Stock
SKU:005036- Sensor: 12MP Sony IMX500 Intelligent Vision Sensor
- Integrated low-power inference engine
- Pre-loaded with MobileNet machine vision model
- 76-Degree field of view
- F1.79 Focal Ratio
- Manually adjustable focus
7Semi Mini ATmega328P Board – 5V
In Stock
SKU:005016- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
SKU:005009Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
SKU:005003- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
SKU:004996- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
SKU:004985- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
In Stock
SKU:004981- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
In Stock
SKU:004968- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino UNO R3 CH340G ATMega328P compatible with arduino + Cable
In Stock
SKU:004960
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














