0
0 items
₹0.00
No products in the cart.
MQ-9 Gas Sensor Module For Carbon Monoxide, Methane, and LPG Detector Module
In Stock
SKU:009270- Good sensitivity to CO/Combustible Gas
- DO switching signal (TTL) output and AO analog signal output.
- High sensitivity to Methane, Propane, and CO
- The module require minimum input voltage of 5±0.2 VDC .
- Current Consumption: 150mA
- For home or factory gas leak detection device, suitable for carbon monoxide, combustible gas monitoring device.
MQ-4 Natural Gas Sensor Module For Methane(CNG) gas Detector Module
In Stock
SKU:009264- This is MQ-4 Natural Gas Sensor Module
- This has Good sensitivity to Combustible gas in wide range
- This has High sensitivity to CH4, Natural gas.
- This has Fast response Stable and long life
- This has Simple drive circuit
Mini Digital Thermometer Humidity Hygrometer (Colour may vary)
In Stock
SKU:009256- Measuring Humidity Range between 10%RH ~ 99%RH.
- Humidity Accuracy of this device is around +5/-5%.
- Humidity Display Resolution of this device is 1%RH.
- Measuring Temperature Range is between -50℃~70℃.
- Temperature measurement accuracy ± 1 degree (at normal temperature)
- Batteries are not included in this model
100K Ohm NTC 3950 Thermistor
In Stock
SKU:009246- The 3950 NTC thermistor has high sensitivity and a swift response
- It is easy to install and has a compact structure.
- The 100k Ohm NTC thermistor is manufactured with adaptive thermo-sensitive material.
- NTC is thick and heating rod is of high quality
- Wiring insulation has high temperature Teflon/ PTFE
ESP-01S DHT11 Temperature Humidity Sensor module
In Stock
SKU:009241- The module can detect the surrounding environment of the humidity and temperature.
- High reliability and excellent long-term stability.
- The DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor.
- The operating voltage is 3.7V-12VDC.
XH-W1219 12V Digital Temperature Controller
In Stock
SKU:009228- 3-digit displays of current temperature and trigger temperature
- Module can operate in a heating or cooling mode of operation
- Multiple parameters can be set such as temp trip point, hysteresis and delay.
- Waterproof NTC temperature sensor has -30 to +110°C measurement range with stated 0.1°C accuracy
- Relay switches up to 120VAC @ 10A or 14VDC @ 10A
- 12V module operation
10K Thermistor Temperature Sensor Module(4 Pin)
In Stock
SKU:009223- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- This module has a working voltage is 3.3 to 5 VDC
- The module's output form is digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
XK-W2001 Adjustable Temperature Controller Socket with 1M Probe and AU Plug
In Stock
SKU:009218- XK-W2001 Adjustable Temperature Controller Mini temperature controller with socket.
- With clear digital display for better readability.
- Wide temperature measuring range.
- Directly power output.
- Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial.
Sensirion SHT30-DIS I2C humidity & temperature sensor
In Stock
SKU:009213- This is Sensirion SHT30-DIS I2C humidity and temperature sensor
- This Sensirion SHT30 humidity and temperature sensor has Fully calibrated, linearized, and temperature compensated the digital output
- This has Wide supply voltage range, from 2.4 V to 5.5 V
- This Sensirion SHT30 humidity and temperature sensor has I2C Interface with communication speeds up to 1 MHz and two user selectable addresses
- This Sensirion SHT30 humidity and temperature sensor has Very fast start-up and measurement time
TEC1-12706 6A Thermoelectric Cooler Peltier Module
In Stock
SKU:009203- TEC1-12706 thermoelectric cooling module
- 12V operation, max 15.4V
- Power: 92W, max temp 138°C
- Supports up to 6A current
- Includes 200mm power cord
Thermoelectric Peltier Refrigeration Cooling System DIY Kit With TEC-12706 Peltier
In Stock
SKU:009200- The DIY kit is a semiconductor cooling kit which uses a TEC1-12706 Thermoelectric Cooler Peltier Module.
- Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work.
- Small volume, does not occupy space, installation is simple.
- This semiconductor cooler is a form of solid-state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- It can be used as a Pet Air Conditioner (chicken, little dog, etc.), portable refrigerators and for medical instruments..
Thermoelectric Peltier Refrigeration Cooling System DIY Kit without TEC-12706 Peltier
In Stock
SKU:009195- The DIY kit is a semiconductor cooling kit which uses a TEC1-12706 Thermoelectric Cooler Peltier Module.
- Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work.
- Small volume, does not occupy space, installation is simple.
- This semiconductor cooler is a form of solid-state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- It can be used as a Pet Air Conditioner (chicken, little dog, etc.), portable refrigerators and for medical instruments..
Mini LCD Digital Thermometer with Probe
In Stock
SKU:009190- Modeling simple, elegant, LCD panels inline connections, moisture-resistant, strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
- Features Long probe line
- LCD display H°C when temperature is higher than 110°C & displays L°C when temperature is lower than -50°C.
- The module is powered by a pair of LR44 button batteries
12V STC-3028 Dual Digital Thermostat Temperature Humidity Control
In Stock
SKU:009185- Be able to control temperature and humidity at the same time.
- The large and clear digital display shows measuring temperature, high accuracy of temperature measuring, and controlling.
- Suitable for automatic switching of refrigeration and heating devices such as seafood machines and cooling water machines.
- The heating/Cooling function could be set separately for refrigeration and heating to protect the temperature controller from violent change.
- Same as humidity Control. Supporting Temp and Humidity Calibration
- With Dual Display Window, be able to display measured temperature/humidity and set temp/humidity at the same time
XM-18 Mini Digital Automatic Egg Incubator
In Stock
SKU:009180- This is the XM-18 Mini Digital Automatic Egg Incubator
- The XM18 egg incubator is a researched product that uses microcomputer technology.
- This egg incubator is integrated with the latest electronic component for the highest accuracy.
- This automatic egg incubator features a digital temperature sensor and moisture-sensitive capacitance humidity sensor.
- This incubator is stable and reliable, time-saving, labor-saving, and easy to use.
Acrylic Case for XH-W1209 Temperature Controller
In Stock
SKU:009170- The acrylic case is best compatible for XH-W1209 temperature controller.
- It protects the temperarure controller from any damages.
- The transparency lets you see the functions and performance of the controller.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














