0
0 items
₹0.00
No products in the cart.
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
Out of stock
SKU:008851- USB Connector type: USB-Mini
- Chip Used: FT232RL
- Output Voltage 5v and 3.3v Indicator LEDs USB Connector
- Automatic detection of data transfer speeds up to 1Mbps
- Data exchange capability with an external interface with UART protocol
- Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
Out of stock
SKU:008846- Chipset: CP2102
- Power: USB, 3.3V (<40mA), 5V, GND, TX, RX
- Baud Rate: 300bps to 1Mbps.
- Signal Levels: 3.3V, positive logic.
- OS Support: Windows, Mac OS, Linux.
- Format Support: 5-8 data bits, 1/2 stop bits
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
In Stock
SKU:008720- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 12V relay ON; 0-2.5V relay OFF
24V 1 Channel Relay Module
In Stock
SKU:008711- Output SPDT Relay.
- Header connector for connecting power and trigger voltage.
- LED indicates relay status.
- Screw terminal connector for easy relay output connection.
Humidity Sensitive Switch Relay Module
In Stock
SKU:008700- Maximum Voltage(V):250V AC
- Supply Current (A):150mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Opt. Relative Humidity(RH):20% ~ 85%
ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
In Stock
SKU:008691- Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
- Working Voltage: DC 5V
- Load Voltage: DC 30V 10A /AC 250V 10A
- Work Temperature: -40℃~85℃
- Work Humidity: 0%~95%RH
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
In Stock
SKU:008681- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
4 Channel Relay Module 24V High and Low Level Trigger Relay Module
In Stock
SKU:008676- Work Voltage: 24VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
In Stock
SKU:008672- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
8 Road/Channel Relay Module (with light coupling) 24V
In Stock
SKU:008668- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
5V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
In Stock
SKU:008658- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
4 Channel Relay Module 5V High and Low Level Trigger Relay Module
In Stock
SKU:008655- Work Voltage: 5VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
In Stock
SKU:008650- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
In Stock
SKU:008644- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
Out of stock
SKU:008642- Part Number: H3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50@2A
- Isolation: Phototriac
ESP8266 10A DC 7-30V Network Relay WIFI Module
Out of stock
SKU:008637- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















