0
0 items
₹0.00
No products in the cart.
DC Motor – 150RPM – 12Volts
In Stock
SKU:005667 KU: 5683
Add to cart
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 150 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Operating Voltage(V): 12
- Rated Speed (RPM): 500
- Rated Torque(kg-cm): 0.7
- Stall Torque(kg-cm): 3
- No Load Current (A): 0.06
DC Motor – 100RPM – 12Volts
In Stock
SKU:005664- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
12 Volts DC Motor – 500 RPM
In Stock
SKU:005659- Operating Voltage(V): 12
- Rated Speed (RPM): 500
- Rated Torque(kg-cm): 0.7
- Stall Torque(kg-cm): 3
- No Load Current (A): 0.06
MG90S Mini Servo Motor(180 Degree)
In Stock
SKU:005575- Model MG90S
- Weight 13 gm
- Operating voltage 4.8V~ 6.6V
- Servo Plug JR
- Stall torque @4.8V 1.8kg-cm
300 RPM Dual Shaft BO Motor-Straight
In Stock
SKU:005140- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
60 RPM BO Motor – Straight
In Stock
SKU:005136- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
300 RPM BO Motor-Straight
In Stock
SKU:005135- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
100 RPM BO Motor – Straight
In Stock
SKU:005131- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
In Stock
SKU:005120- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 70W (max)
- PWM duty cycle: 1% -100%.
- PWM frequency:20khz
- Wide voltage DC motor speed controller.
TowerPro SG90 Mini Servo – 360 degree Rotation – Standard Quality
In Stock
SKU:005096- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
7Semi Mini ATmega328P Board – 5V
In Stock
SKU:005016- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
SKU:005009Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
SKU:005003- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
SKU:004996- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
SKU:004985- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.











