0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality
In Stock
SKU:006826- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 10 kg-cm
- Stall torque @6.6V : 12 kg-cm
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
In Stock
SKU:006819- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
PCA9685 16 Channel Servo Motor Drive
In Stock
SKU:006721- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
SKU:006481- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
Soldron High Quality 75W/230V Soldering Iron
In Stock
SKU:006449- Brand: Soldron
- Output: 75 Watts
- Operating voltage: 110 to 230V AC
- Colour: Black-Green
- Bit tip Diameter: 7mm
Soldron High-Quality 230V/50W Soldering Iron
In Stock
SKU:006445- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
SKU:006343- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
Soldron High Quality 100W/230V Soldering Iron
In Stock
SKU:006270- Attains full operating temperature within seconds
- Maintain constant tip temperature
- Low current leakage
- Safe for use on delicate components
- Maximum heat transfer efficiency
- Slide-on replaceable tips
- Cool Grip Nylon handle
Soldron High Quality 35W/230V Soldering Iron
In Stock
SKU:006264- Brand: Soldron
- Rated power : 35 Watts
- Operating Voltage: 110 to 230V AC
- Cable length: 1.5 Meter
- Max Temperature: 420ºC
230V 25W Soldron Soldering Iron
In Stock
SKU:006256A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
SKU:006054- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006049- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
5V 4 phase Stepper Motor 28YBJ-48 with ULN2003 Driver Board Grade A High Quality
In Stock
SKU:005796TowarPro MG996R Digital High Torque Servo Motor Metal Gear 180° and 360°
In Stock
SKU:005771Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
In Stock
SKU:005737Brushless Motor Controller DC 12-36V 500W PWM Driver Board
Out of stock
SKU:005734
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















