0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
F450 F550 Replacement Frame Arm(Black)
In Stock
SKU:006581- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
- Color : Black
F450 F550 Replacement Frame Arm (White)
In Stock
SKU:006571- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
F450 F550 Replacement Frame Arm (Red)
In Stock
SKU:006566- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
SKU:006481- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
SKU:006343- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit
In Stock
SKU:006067- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
SKU:006054- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006049- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
5V 4 phase Stepper Motor 28YBJ-48 with ULN2003 Driver Board Grade A High Quality
In Stock
SKU:005796TowarPro MG996R Digital High Torque Servo Motor Metal Gear 180° and 360°
In Stock
SKU:005771Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
In Stock
SKU:005737Brushless Motor Controller DC 12-36V 500W PWM Driver Board
Out of stock
SKU:00573420A Brushed Electronic Speed Controller
Out of stock
SKU:005707- Operating Voltage: 3 – 9VDC
- Output Current: 20A
- Battery Input: 2S Lipo
- Driver Frequency: 2KHz
Motor Driver TB6612FNG Module
Out of stock
SKU:005688- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
DC Motor 1000RPM 12Volts
In Stock
SKU:005675- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
12 Volt DC Motor – 200 RPM
In Stock
SKU:005668- Operating Voltage(V): 12
- Rated Speed (RPM): 200
- Rated Torque(kg-cm): 1.5
- Stall Torque(kg-cm): 5.4
- Load Current (A): 0.3

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














