0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
9V Cell Box, without Cover – 2pcs
In Stock
SKU:009764- Material: Plastic
- Output Voltage(V): 9
- ON/OFF Switch: NO
- Cable Length: 15 cm
- Color: Black
- Dimensions in mm (LxWxH): 54x30x18
- Weight (gm): 7
Transparent 2 x AA Battery Holder Box with ON/OFF Switch and Cover
In Stock
SKU:009757- Holds 2 AA batteries
- Colour: Semi-Transparent
- With a cover and Locking
- Comes with an ON/OFF switch
- Easy install, convenient to use
- High-quality plastic material.
CR2032 Half-Round Cell Coin Lithium Button Battery Socket Holder Case Boxes Vertical Inline 3 Pins Black Plastic 3V -1Pcs.
In Stock
SKU:009752- Model: CR2032 holder
- Color: Black
- Material: Plastic
- Size: 23 x 18 x 5mm
- Weight: 8g each
- Easy to install
18650 x 1 BLM Cell Box, with Pin, Without Cover
In Stock
SKU:009748- Product: 18650 x 1 BLM Cell Box, with Pin, Without Cover
- Material: High-quality plastic material
- Color: Black
- Battery type: 18650.
- Easy to use
Robodo MO42 Micro USB 5V 1A 18650 Lithium Battery Charger Board with Protection Module
In Stock
SKU:009741- Input Voltage: DC5V
- Charging Cut-off Voltage: 4.2V±1%
- Maximum Charging Current: 1A
- Battery Over Discharge Protection Voltage: DC2.5V
- Battery Over Current Protection Current: 3A
- Board Size: 26 X 17mm/1.02 X 0.67inch(L*W)
1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery.
In Stock
SKU:009736- High accuracy voltage detection circuit;
- Using high voltage device charging terminal;
- The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit);
- The battery charge and discharge can control the MOS transistor;
Transparent Waterproof 4 x 18650 Battery Portable Clear Plastic Storage Box
In Stock
SKU:0097274 x AA Battery Holder Box Without Cover
In Stock
SKU:009720- Holds 4 AA batteries
- Easy install, convenient to use.
- Dimensions mm (LxWxH): 62 x 58 x 15
- Weight: 15 gm
- Material: Plastic
- Internal Connection: Series
HT12D Decoder IC
In Stock
SKU:009697- HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
- In simple terms, HT12D converts the serial input into parallel outputs.
- HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
- The data on 4-bit latch type output pins remain unchanged until new is received.
W25Q64 Nor Flash Storage Module 64Mbit
In Stock
SKU:009692- This is W25Q64 NorFlash Storage Module 64Mbit
- The Working voltage is 2.7V ~ 3.6V
- The Capacity is 64M-bit / 8M-byte.
- The Clock frequency is <104MHz.
- This has Greater flexibility and performance.
- This has Low energy consumption.
- It accompanies pin bar
150W AC-DC Buck Converter 100V-240V to 24V 6A Step Down Power Supply Module
In Stock
SKU:AB1006- Input Voltage : AC 100 – 240 V(50 HZ/60 HZ).
- Output Voltage: DC 24V.
- Output Current : Peak 6A and Nominal 5.5A (no voltage drop).
- Output Power : 150W (maximum 220 W).
- Overload Protection: Yes.
- Over Current Protection : Yes.
- Short Circuit Protection: Yes.
STEMMA QT / Qwiic JST SH 4-Pin Cable – 200mm Long
In Stock
SKU:007587- 200mm (7.8″) length
- JST-SH 4-pin connectors, 1mm pitch
- Secure latch, easy to plug/unplug
- Works with Qwiic & STEMMA QT
ELECROW 4 Pin Crowtail Cable(5 PCS)
In Stock
SKU:007584500mm Qwiic Cable With 1mm JST Connector
In Stock
SKU:007581SparkFun PRT-17912 150mm Qwiic Cable To Breadboard Jumper (4-pin)
In Stock
SKU:007576SparkFun PRT-17258 200mm Qwiic Cable With 1mm JST Connector
In Stock
SKU:007573
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















