Filter

Showing 49–64 of 132 resultsSorted by popularity

Sort:
High Sensitivity Water Level Sensor compatible with Arduino

High Sensitivity Water Level Sensor compatible with Arduino

Original price was: ₹29.00.Current price is: ₹16.00.
In Stock
SKU:009383
  • This is High Sensitivity Water Level Sensor compatible with Arduino
  • High Sensitivity Water Sensor for Arduino projects.
  • Precise and reliable water level detection.
  • Operating voltage: DC3-5V, Operating current: <20mA.
  • Analog output for easy integration with Arduino boards.
  • Streamlined design for effortless setup and readings.
  • Durable and long-lasting performance.
  • The operating temperature is 10℃-30℃
  • The Humidity is 10% -90% non-condensing
Add to cart
1/2 Inch Water Flow Sensor – YF-S201

1/2 Inch Water Flow Sensor – YF-S201

Original price was: ₹299.00.Current price is: ₹232.00.
In Stock
SKU:009379
  • This is the YF-S201 Water flow sensor
  • This sensor is lightweight, small in size, and simple to install.
  • This water flow sensor sits in line with your water line and contains a pinwheel sensor to measure how much water has moved through it.
  • This has an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution.
  • The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
Add to cart
3/4 Inch Brass Water Flow Sensor SEN-HZ43WB

3/4 Inch Brass Water Flow Sensor SEN-HZ43WB

Original price was: ₹684.00.Current price is: ₹497.00.
In Stock
SKU:009376
  • The water flow sensor has a flow range of 2～45 Liter/min
  • It is used to measure the flow rate of water.
  • It consists of a turbine-type rotor that is placed in the water stream.
  • It has a digital output that can be read by a microcontroller or other host device.
  • It is commonly used in applications such as irrigation systems, water treatment plants, and industrial process control.
  • It is easy to install and has a low cost.
Add to cart
Float Sensor Contact Type CSSP

Float Sensor Contact Type CSSP

Original price was: ₹253.00.Current price is: ₹190.00.
In Stock
SKU:009373
  • SS pin moulded within Polypropylene Completely insulated wire joints
  • A CSSP float sensor is a type of level sensor that is used to detect the level of a liquid in a tank or container.
  • It consists of a float that is attached to a switch, and as the float rises or falls with the level of the liquid, it activates or deactivates the switch.
  • The CSSP sensor is characterized by the fact that it has a contact type switch, which means that the switch is activated when the float comes into physical contact with a stationary part of the sensor.
Add to cart
1/2 Inch Water Flow Sensor SEN-HZ21WA

1/2 Inch Water Flow Sensor SEN-HZ21WA

Original price was: ₹349.00.Current price is: ₹280.00.
In Stock
SKU:009368
  • This Water Flow Sensor SEN-HZ21WA is built for best compatibility with micrcontrollers like Arduino and Raspberry Pi.
  • It needs a working voltage of 5V and 15mA current.
  • It works at a range of 1~30L/min(m³/h) and working pressure of 1.75MPa.
  • The sensor comes with three wires - Red (5V-12V), Black (Ground) and Yellow (Output pulse).
Add to cart
Water Flow Sensor – YF-B6 Flowmeter G3/4 1-30L/min 5-15V Brass

Water Flow Sensor – YF-B6 Flowmeter G3/4 1-30L/min 5-15V Brass

Original price was: ₹999.00.Current price is: ₹699.00.
In Stock
SKU:009363
  • High Precision: Zbotic Water Flow Sensor measures 1~30 L/min and is suitable for various applications. Do to ensure the highest quality and durability. Brass golden.
  • Versatile Usage: Includes hall effect sensor, digital output, suitable for water dispenser or coffee machine, encourages flow rate measurement development, suitable for various age ranges.
  • Advanced Technology: Zbotic Water Flow Sensor features Hall effect sensor technology for precise flow measurement. Ideal for industrial, commercial, and residential use.
  • Durable Build: Made with brass and plastic, provides durability and reliability. Suitable for various conditions, perfect for flow rate measurement in different environments.
  • Easy Installation: Zbotic Water Flow Sensor is easy to use and maintain with its unique design. Perfect for DIY enthusiasts and professionals alike.
  • Wide Applications: Suitable for industrial, commercial, and residential use, offering precise flow measurement and ensuring efficiency.
  • Reliable Performance: Provides accurate flow measurement and ensures consistent performance. Ideal for water management and monitoring systems.
Add to cart
Magnetic Float Sensor FS37A (Vertical)

Magnetic Float Sensor FS37A (Vertical)

Original price was: ₹199.00.Current price is: ₹107.00.
In Stock
SKU:009358
  • Applications of this Switch include shipbuilding industry, generating equipment, petrochemical and food industry, water treatment equipment, dyeing, and finishing industry, and hydraulic machinery.
  • As long as the material used is in the correct shape and nature of any liquid or pressure, you can control the temperature.
  • Long-lasting life and easy to use.
Add to cart
Mini Water Flow Sensor (White)

Mini Water Flow Sensor (White)

Original price was: ₹349.00.Current price is: ₹287.00.
In Stock
SKU:009354
  • This is Mini Water Flow Sensor (White)
  • This sensor is lightweight, small in size, and simple to install.
  • This water flow sensor sits in line with your water line and contains a pinwheel sensor to measure how much water has moved through it.
  • This has an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution.
  • The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
Add to cart
1/4 Inch Brass Water Flow Sensor SEN-HZ41WC

1/4 Inch Brass Water Flow Sensor SEN-HZ41WC

Original price was: ₹599.00.Current price is: ₹452.00.
In Stock
SKU:009350
  • This SEN-HZ41WC water flow sensor is connected in line with the liquid whose flow rate has to be measured.
  • Flow range: 0.35 ～ 3.0 Liter/min and Withstand hydraulic pressure: ≤1.75 MPa.
  • Insulation resistance: >100MΩ
  • Electrical strength: AC500V, 50HZ
  • Flow characteristic: F=73Q, F:HZ, Q:L/min，±10% and features Pulse duty cycle: 50%.
Add to cart
Turbidity Sensor Module Kit for Arduino

Turbidity Sensor Module Kit for Arduino

Original price was: ₹1,249.00.Current price is: ₹927.00.
In Stock
SKU:009345
  • Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
  • Measures turbidity of water in rivers.
  • Detects and verifies water quality.
  • Digital and analog output.
  • Able to detect particles that are suspended in water.
  • Trimpot for sensitivity adjustment.
  • Ideal monitoring of water turbidity in rivers, streams, lakes, water boxes, catchment and research sites, laboratories, tanks with liquids.
  • Comes with module and jumpers.
Add to cart
Fermion MEMS Gas Detection Sensor Carbon Monoxide (CO) (Breakout, 5-5000ppm)

Fermion MEMS Gas Detection Sensor Carbon Monoxide (CO) (Breakout, 5-5000ppm)

Original price was: ₹699.00.Current price is: ₹534.00.
In Stock
SKU:009343
  • Measures 13x13x2.5mm
  • Low Power Consumption of less than 20 mA
  • Advanced MEMS technology
  • Provides quick detection and recovery times
  • Specifically designed for carbon monoxide (CO)
  • Detects CO concentrations from 5 to 5000 ppm
  • High sensitivity with R0/Rs ≥ 3 in 150 ppm CO
  • Works in temperatures from -10°C to 50°C
  • Works in humidity from 15% to 90% RH
Add to cart
Fermion MEMS Gas Detection Sensor Hydrogen Sulfide (H2S)

Fermion MEMS Gas Detection Sensor Hydrogen Sulfide (H2S)

Original price was: ₹1,499.00.Current price is: ₹1,247.00.
In Stock
SKU:009341
  • The sensor is small, measuring just 13 x 13 x 2.5mm
  • It operates with a low current of less than 20mA
  • High Sensitivity with a ratio of R0 (in air) to Rs (in 50ppm H2S) of ≥ 3 for accurate gas detection
  • It offers rapid response recovery
  • Built with modern MEMS technology
  • Detect Hydrogen Sulfide (H2S) and Benzene within a range of 0.5-50ppm.
  • Functions with a voltage of 3.3-5V
  • Operates in temperatures from -10 to 50°C
  • Operates in humidity levels of 15-90% RH (non-condensing)
Add to cart
Fermion MEMS Gas Detection Sensor Ammonia (NH3)

Fermion MEMS Gas Detection Sensor Ammonia (NH3)

Original price was: ₹999.00.Current price is: ₹823.00.
In Stock
SKU:009339
  • Small and easy to fit at 13 x 13 x 2.5mm.
  • Uses less than 20mA, keeping power costs low.
  • Accurate readings with a sensitivity ratio of ≥ 3.
  • Fast reactions for reliable results.
  • Built with modern MEMS technology for precise performance.
  • Detects ammonia (NH3) in a range of 1-300ppm.
  • Functions at 3.3-5V with temperatures from -10 to 50°C and 15-90% humidity.
  • Lasts at least 5 years in the air.
  • Provides an analog voltage output for easy integration.
Add to cart
Fermion: MEMS Odor Smell Gas Detection Sensor

Fermion: MEMS Odor Smell Gas Detection Sensor

Original price was: ₹999.00.Current price is: ₹797.00.
In Stock
SKU:009337
  • COMPACT AND PORTABLE: The DFRobot Fermion e-Nose measures just 13x13x2.5 mm, making it ideal for integrated applications. Advanced MEMS technology ensures high durability and reliability in a small package.
  • ENERGY EFFICIENT: Consumes less than 20mA of power during operation. It's designed for energy-sensitive projects, supporting sustainable technology initiatives and battery-powered applications.
  • HIGH SENSITIVITY: Features exceptional responsiveness with rapid recovery times. Perfect for real-time monitoring and analysis, facilitating quick decision-making in critical environments.
  • BROAD APPLICATION RANGE: From air quality monitoring in smart homes to detecting spoilage in food storage, this sensor adapits to various needs. It's suitable for both commercial and personal projects, enhancing safety and efficiency.
  • USER-FRIENDLY INTERFACE: Offers an analog voltage output, making it easy to integrate with existing systems like Arduino for hobbyists and professionals alike.
  • DURABLE AND ROBUST: Designed to withstand harsh conditions, operating effectively between -10°C and 50°C. Its long lifespan (over 5 years) makes it a reliable choice for long-term deployments.
  • AFFORDABLE AND ACCESSIBLE: Available at a competitive price point, it provides high-tech capabilities without a high-cost barrier, democratizing access to advanced sensor technology.
Add to cart
MQ-135 Gas Sensor Module For NH3, Alcohol, benzene, smoke , CO2 Detector Module

MQ-135 Gas Sensor Module For NH3, Alcohol, benzene, smoke , CO2 Detector Module

Original price was: ₹149.00.Current price is: ₹97.00.
In Stock
SKU:009335
  • The sensor is sensitive to a wide range of gases, including NH3, NOx, alcohol, Benzene, smoke, CO2 and so on.
  • Output voltage boosts along with the concentration of the measured gases increases.
  • The sensor is relatively low cost, making it a popular choice for hobbyist projects and low-end air quality monitoring applications
  • The sensor features Adjustable sensitivity
  • Signal output indicator
  • MQ-135 sensor has a wide range of detection from 10 to 1000ppm
Add to cart
MQ-5 Gas Sensor Module For H2, LPG, CH4, CO Detector Module

MQ-5 Gas Sensor Module For H2, LPG, CH4, CO Detector Module

Original price was: ₹139.00.Current price is: ₹90.00.
In Stock
SKU:009332
  • This is MQ-5 Gas Sensor Module
  • The Operating voltage of the gas sensors is 5 VDC.
  • MQ-5 gas sensor has high sensitivity to Methane, Propane, and Butane, and could be used to detect both Methane and Propane.
  • The sensor could be used to detect different combustible gas especially Methane, it is with low cost and suitable for different application.
  • Fast response Stable, long life and Simple drive circuit.
Add to cart

Filter Products

Categories

Filter by price

Product Status