0
0 items
₹0.00
No products in the cart.
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)
In Stock
SKU:006798- Equips you with robust Wi-Fi and Bluetooth capabilities.
- Can easily integrate into other products with 30-pin design.
- Choose between AP, STA, or AP+STA modes.
- The support for Lua programming simplifies development.
- This board includes a CP2102 USB-UART bridge.
- Powered by the ESP32S chip.
- Offers scalable and adaptive features with adjustable clock frequencies.
- Ideal for various applications.
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester Rated 5.00 out of 5 based on 1customer rating
In Stock
SKU:006787- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
Heart Rate Pulse Sensor Module
In Stock
SKU:006782- Heart Rate Pulse Sensor Module can be put on the finger or earlobe, through interconnected line can be connected to the Arduino.
- This Pulse Sensor works with a 3V - 5V Arduino.
- Essence is an integrated optical amplifying circuit and noise eliminating circuit heart rate sensor.
- This Pulse Sensor includes the circuits like Amplification & Noise cancellation.
MQ-2 Gas Sensor Module For H2, LPG, CH4, CO, Smoke or Propane Detector Module
In Stock
SKU:006775- Operating Voltage is +5V.
- Used to detect LPG, Alcohol, Propane, Hydrogen, CO, and methane.
- Used as a Digital or analog sensor.
- Sensitivity of Digital pin can be varied using the potentiometer.
- Have a long life.
- It has a Simple drive circuit.
PS2 Joystick Module Breakout Sensor
In Stock
SKU:006768- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
PCA9685 16 Channel Servo Motor Drive
In Stock
SKU:006721- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
BTS7960B 43A H-Bridge Motor Driver
In Stock
SKU:006716- This is BTS7960B 43A H-Bridge Motor Driver
- Double BTS7960 large current (43 A) H bridge driver
- The supply voltage: 5.5V to 27V
- This has Overtemperature shut down with latch behavior
- This has Overvoltage lockout and Undervoltage shut down
- The Driver circuit with logic level inputs.
- This has an onboard 5V power indicator
- This has a driver circuit with logic-level inputs.
Raspberry Pi USB Plug and Play Desktop Microphone
In Stock
SKU:006708- USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
- Designed to filter out background noises for crisp, clear audio
- Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
- Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
- Flexible neck to adjust your convenient direction and Height for talking.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter
In Stock
SKU:006699- Working voltage: DC 9V–36V
- Output voltage: 5.2V/5A/25W
- 9~24V input: Output 5.2V/6A/30W
- 24~32V input: output 5.2V/5A/25W
- 32~36V input: output 5.2V/3.5A/18W
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU:006689 SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
NRF24L01+PA+LNA
In Stock
SKU:006683- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
Robot Car Wheel 100mm x 20mm
In Stock
SKU:006678P45 Small Float Level Control Switch Plastic Float Switch
In Stock
SKU:006668- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















