0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
12V 4CH Relay Board
In Stock
SKU:006651- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
2 CH 12V Relay Board
In Stock
SKU:006646- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
GY-302 BH1750 Light Intensity Module
In Stock
SKU:006641- No ambient light distinction
- High precision determination accurate to 1 Lux for different lights
- ROHM original package BH1750FVI chip
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interfac
High Landing Gear For SK480 F450 F550 Quadrocopter
In Stock
SKU:006611- Color: black
- Material: ABS Plastic
- The span of theĀ bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 4 Axis Quadcopter Frame Kit
In Stock
SKU:006606 Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Motor Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
Read more
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
In Stock
SKU:006601 Material: glass fiber
Compatible with MK KK flight control installment pitch of holes
Compatible with MK KK flight control system
Can connect 1-16 ESC.
Board Dimensions : 50 x 50 x 2 mm.
Weight:Ā 8 gm.
Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
Read more
ZMR 250 / QAV250 Quadcopter Frame
In Stock
SKU:006586- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
F450 F550 Replacement Frame Arm(Black)
In Stock
SKU:006581- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220Ć40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
- Color : Black
F450 F550 Replacement Frame Arm (White)
In Stock
SKU:006571- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220Ć40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
F450 F550 Replacement Frame Arm (Red)
In Stock
SKU:006566- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220Ć40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
PAM 8403 Amplifier Module with Knob
In Stock
SKU:006489- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
SKU:006487- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
SKU:006481- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output ā for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
SKU:006476- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
Soldron High Quality 75W/230V Soldering Iron
In Stock
SKU:006449- Brand: Soldron
- Output: 75 Watts
- Operating voltage: 110 to 230V AC
- Colour: Black-Green
- Bit tipĀ Diameter: 7mm
Soldron High-Quality 230V/50W Soldering Iron
In Stock
SKU:006445- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a ReplaceableĀ tip.
- Cool Grip Insulating Nylon Handle

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
Ā© 2025 AtomlabIndia. All rights reserved.















