Filter
Sort:
IR (Infrared) Obstacle Avoidance Sensor Module

IR (Infrared) Obstacle Avoidance Sensor Module

₹22.00
In Stock
  1. Main Chip LM393
  2. Operating Voltage : 3.3 ~ 5 VDC
  3. Distance Measuring Range- 8 cm
  4. Dimensions 48 x 14 x 8 mm
  5. Weight-15 grams
Add to cart
MQ-3 Alcohol Detector Gas Sensor Module

MQ-3 Alcohol Detector Gas Sensor Module

₹105.00
In Stock
  1. Signal output light indicator.
  2. Analog and level signal output.
  3. TTL output valid signal is low.  (When the output low signal light can be directly connected microcontroller or relay module).
  4. The carbon monoxide detection with better sensitivity.
Add to cart
DHT11 Module with LED (Temperature and Humidity sensor)

DHT11 Module with LED (Temperature and Humidity sensor)

₹59.00
In Stock
  1. Input Supply voltage (VDC): 3.3 ~ 5
  2. Supply Current (mA): measurement 0.3mA standby 60μA.
  3. Temperature measurement range: 0~50 degrees
  4. Temperature measurement error: ±2 degrees
  5. Humidity measurement range: 20%~95%RH
Add to cart
Soil Moisture Sensor Module

Soil Moisture Sensor Module

₹34.00
In Stock
  1. Operating voltage: 3.3V to 5V
  2. Dual output mode for accuracy
  3. Easy installation with bolt-hole
  4. Power (red) and digital output (green) indicators
  5. LM393 comparator chip for stability
Add to cart
Ultrasonic Sensor Module HCSR04

Ultrasonic Sensor Module HCSR04

₹56.00
In Stock
  1. Affordable Price
  2. Operating Voltage: 5 V
  3. Sonar Sensing Range: 2-400 cm
  4. Max. Sensing Range: 450 cm
  5. Frequency: 40 kHz
Add to cart
R307S Fingerprint Reader Sensor Module

R307S Fingerprint Reader Sensor Module

₹815.00
In Stock
  1. Operating voltage (v): 4.2 ~ 6 VDC
  2. Current consumption: ≤75mA
  3. Verification Speed: 0.2 sec
  4. Scanning Speed: 0.3 sec
  5. Character file size: 256 bytes
  6. Template size: 512 bytes
Add to cart
7Semi Mini ATmega328P Board – 5V

7Semi Mini ATmega328P Board – 5V

₹238.00
In Stock
  1. Microcontroller: ATmega328
  2. Circuit Operating Voltage: 5V
  3. Clock frequency: 16MHz.
  4. Digital I/O Pins: 14
  5. 8 analog input port: A0 ~ A7.
  6. A pair of TTL level serial port transceiver : RX / TX.
  7. 6 PWM port: D3, D5, D6, D9, D10, D11.
  8. Support serial download.
Add to cart
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

₹1,235.00
In Stock
Add to cart
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

₹188.00
In Stock
  1. Operating Voltage (logic level): 5V
  2. 8 analog inputs ports: A0 ~ A7
  3. 14 Digital input / output ports: TX, RX, D2 ~ D13
  4. 1 pair of TTL level serial transceiver ports RX / TX
  5. Using Atmel Atmega328P-AU MCU
  6. There is a bootloader installed in it
  7. Standard 0.1” spacing DIP (breadboard friendly).
  8. Manual reset switch.
Add to cart
UNO Based ESP8266 Nodemcu Development Board

UNO Based ESP8266 Nodemcu Development Board

₹230.00
In Stock
  1. Based on ESP-8266EX.
  2. Arduino compatible, using Arduino IDE to program.
  3. Support OTA wireless upload.
  4. Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
  5. The direct use of Arduino IDE development, the same operation with Arduino UNO.
  6. Operating Voltage: 3.3V
  7. Digital I/O Pins: 11
  8. Analog Input Pins: 1
Add to cart
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

₹365.00
In Stock
  1. Microcontroller: ATmega168 or ATmega328V
  2. Operating Voltage: 2.7-5.5 V
  3. Digital I/O Pins: 14
  4. PWM Channels: 6
  5. Analog Input Channels: 6
  6. DC Current per I/O Pin: 40 mA
  7. Board will run from 2V to 5V.
  8. The latest version of the LilyPad supports automatic reset for even easier programming.
  9. The back side of the LilyPad is now completely flat!
Add to cart
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

₹1,335.00
In Stock
  1. Microcontroller: ATmega2560
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 6-20V
  5. Digital I/O Pins: 54 (of which 15 provide PWM output)
  6. Analog Input Pins: 16
  7. DC Current per I/O Pin: 40 mA
  8. DC Current for 3.3V Pin: 50 mA
Add to cart
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

₹1,199.00
In Stock
  1. Microcontroller CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. Dimensions : 111 x 54 x 12 (LxWxH) mm.
Add to cart
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

₹236.00
In Stock
  1. Microcontroller ATmega328 (SMD) – Interface CH340G
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 5-20V
  5. Digital I / O Pins 14 (of which 6 provide PWM output)
  6. Analog Input Pins: 6
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

₹493.00
In Stock
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)

Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)

₹203.00
In Stock
  1. Operating Voltage (logic level): 5V
  2. With Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.
Add to cart

Filter Products

Categories

Filter by price

Product Status