0
0 items
₹0.00
No products in the cart.
PCA9685 16 Channel Servo Motor Drive
In Stock
SKU:006721- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
SKU:006481- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
SKU:006343- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
SKU:006054- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006049- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- nput Voltage: 220V AC.
- Maximum Power: 4000W.
- Adjustable Voltage: 0-220V AC.
- AC frequency: 50-60Hz.
5V 4 phase Stepper Motor 28YBJ-48 with ULN2003 Driver Board Grade A High Quality
In Stock
SKU:005796TowarPro MG996R Digital High Torque Servo Motor Metal Gear 180° and 360°
In Stock
SKU:005771Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
In Stock
SKU:005737Brushless Motor Controller DC 12-36V 500W PWM Driver Board
Out of stock
SKU:00573420A Brushed Electronic Speed Controller
Out of stock
SKU:005707- Operating Voltage: 3 – 9VDC
- Output Current: 20A
- Battery Input: 2S Lipo
- Driver Frequency: 2KHz
Motor Driver TB6612FNG Module
Out of stock
SKU:005688- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
DC Motor 1000RPM 12Volts
In Stock
SKU:005675- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
12 Volt DC Motor – 200 RPM
In Stock
SKU:005668- Operating Voltage(V): 12
- Rated Speed (RPM): 200
- Rated Torque(kg-cm): 1.5
- Stall Torque(kg-cm): 5.4
- Load Current (A): 0.3
DC Motor – 150RPM – 12Volts
In Stock
SKU:005667 KU: 5683
Add to cart
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 150 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.













