0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
2 CH 12V Relay Board
In Stock
SKU:006646- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
Out of stock
SKU:006555- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
Seeed Studio XIAO RP2040 Development Board Supports Arduino,
Out of stock
SKU:006513- Compact and Arduino-compatible development board based on Raspberry Pi RP2040
- Thumb-sized, surface-mount design for space-saving applications
- Supports Arduino, MicroPython, and CircuitPython programming
- Ideal for learning coding, electronics, and prototyping
- Cost-effective solution with a wide range of compatible libraries
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++
Out of stock
SKU:006503- Compact development board powered by Raspberry Pi RP2350
- Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
- Supports MicroPython, C, and C++ development
- 19 multifunction GPIOs, RGB LED, and Battery Management System
- Ultra-low power consumption (27μA) with battery power supply
- Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0
Out of stock
SKU:006497- Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
- Bluetooth 5.0
- Wireless connect
- Onboard 2 MB flash
- Embedded machine learning projects
PAM 8403 Amplifier Module with Knob
In Stock
SKU:006489- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
SKU:006487- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
SKU:006476- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
MAX7219 8×8 LED Dot Matrix Display Module
In Stock
SKU:005918- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
TM1637 4 Bits Digital Tube LED Display Module
In Stock
SKU:005912MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
In Stock
SKU:005907- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCB Dimensions: 128×32 (LxW) mm
Seeed Studio XIAO ESP32C6
Out of stock
SKU:005618- Processor: ESP32-C6 SoC with two 32-bit RISC-V processors (High-Performance and Low-Power).
- Memory: 512KB SRAM and 4MB Flash on-chip.
- 2.4GHz Wi-Fi 6 (802.11ax)
- Bluetooth 5.0 (LE)
- Zigbee
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
In Stock
SKU:005585- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
1.3 inch I2C OLED Display Module 4pin Blue Color
In Stock
SKU:005511- Driver IC: SH1106
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Pixel Color: Blue
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
In Stock
SKU:005508- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
Original JHD539 16×4 Character LCD Display With White Backlight
In Stock
SKU:005506
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















