6
6 items
₹1,419.00
Subtotal: ₹1,419.00
Hurray! Your order qualifies for free shipping!
6
Subtotal: ₹1,419.00
Hurray! Your order qualifies for free shipping!
“RS-775 Motor Multipurpose Brushed 12-24Volt DC Motor” has been added to your cart. View cart
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
100 RPM BO Motor – Straight
In Stock
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
In Stock
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 70W (max)
- PWM duty cycle: 1% -100%.
- PWM frequency:20khz
- Wide voltage DC motor speed controller.
Micro 130 Small DC Motor 3V-6V
In Stock
- Operating Voltage Range: 3 ~ 9VDC
- No-load Current: 70 mA max
- Loaded Current: 200 mA max
- Operating Temperature: 50°C
- Rated Speed: 1000 RPM
- 3V to 9V DC Flat Small Size Toy Motor
RS-775 Motor Multipurpose Brushed 12-24Volt DC Motor
In Stock
- Operating Voltage: 12-24VDC
- No Load Current: 0.47A
- No-load Speed: 10000RPM
- Rated Torque: 364 g.cm
- Full Load Current: ≤2.5A
- Rated Current: ≤2.5A
- Rated Power: 28W
- Operating Voltage: 5-15VDC
- No Load Current: 0.2A
- No-load Speed: 4000RPM
- Rated Torque: 265 g.cm
- Full Load Current: ≤2A
- Rated Current: ≤2A
DC 3-6 V Mini Micro Submersible Water Pump
In Stock
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
TowerPro SG90 Mini Servo – 360 degree Rotation – Standard Quality
In Stock
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Wireless Module
In Stock
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
ESP32 CAM WiFi Bluetooth Module with OV2640 Camera Module
In Stock
7Semi Mini ATmega328P Board – 5V
In Stock
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
In Stock
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














