0
0 items
₹0.00
No products in the cart.
- Clear filters
- Mechanical parts & measurement tools
- Power Supply, Batteries & Accessories
- Robots & DIY Kits
- STEM
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
Robot Car Wheel 100mm x 20mm
In Stock
SKU:006678AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long
Out of stock
SKU:00756410 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
DIY Acrylic Robot Manipulator Mechanical Arm Kit (not-including Servo and Board)
In Stock
SKU:007293- Material: Acrylic
- Affordable 4-DOF manipulators.
- Highly versatile mechanical parts.
- Wood board laser cutting with precision.
- Easy to assemble.
65mm Robot Smart Car 12 Rim Wheel – Blue
In Stock
SKU:007822- 65mm diameter wheel with 25mm width for robot applications.
- Made with durable rubber for excellent traction.
- Features a sturdy nylon-reinforced plastic rim.
- Lightweight design, perfect for various terrains.
- Stylish light blue color enhances robotic designs.
Adafruit STEMMA QT / Qwiic JST SH 4-pin Cable – 100mm Long
Out of stock
SKU:007558STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
Blix Queaky- STEM & Experimental Toys (Blue)
In Stock
SKU:010695- It works on the principle of a closed circuit. The moment Queaky senses that the circuit is closed meaning there is a loop for the current to flow, it gives out a shout. The tone is based on how much resistance is present in the circuit.
- You can play music with Queaky with leaves on a tree, or a little water and a string, or even just with your fingers if you can master it. You can test different materials, use it to prank people around you, or even just cure some boredom.
- Batteries- depends on how much you use it! But be sure to not leave the switch on when not in use. And in case it dies out before you’re done, you can replace the batteries with 2 regular coin cells
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
In Stock
SKU:009839- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
150W AC-DC Buck Converter 100V-240V to 24V 6A Step Down Power Supply Module
In Stock
SKU:AB1006- Input Voltage : AC 100 – 240 V(50 HZ/60 HZ).
- Output Voltage: DC 24V.
- Output Current : Peak 6A and Nominal 5.5A (no voltage drop).
- Output Power : 150W (maximum 220 W).
- Overload Protection: Yes.
- Over Current Protection : Yes.
- Short Circuit Protection: Yes.
10 CM 40 Pin Dupont Cable Male/Male, Male/Female, Female/Female Cable Combo
In Stock
SKU:007475- 40P color DuPont line
- Length: 100mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
4WD Suspension Smart Car Chassis with 125 RPM BO Motors Kit
In Stock
SKU:007331- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
STC-3028 Digital Temperature Humidity Controller 110-220V
In Stock
SKU:007163- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















