Filter
Sort:
L293D Motor Driver Module

L293D Motor Driver Module

Original price was: ₹129.00.Current price is: ₹76.00.
In Stock
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

Original price was: ₹199.00.Current price is: ₹149.00.
In Stock
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

Original price was: ₹99.00.Current price is: ₹67.00.
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

Original price was: ₹49.00.Current price is: ₹15.00.
In Stock
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
In Stock
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Add to cart
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
In Stock
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Add to cart
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

Original price was: ₹4,099.00.Current price is: ₹3,497.00.
In Stock
  • Smart AI vision camera solution for edge AI applications
  • Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
  • Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
  • Supports TensorFlow & PyTorch frameworks
  • Compatible with Arduino IDE for easy development
  • No-code model deployment and real-time inference visualization via SenseCraft AI
  • Comes in a custom 3D-printed enclosure
Add to cart
Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Original price was: ₹1,399.00.Current price is: ₹912.00.
In Stock
  • Compact and Arduino-compatible development board based on Raspberry Pi RP2040
  • Thumb-sized, surface-mount design for space-saving applications
  • Supports Arduino, MicroPython, and CircuitPython programming
  • Ideal for learning coding, electronics, and prototyping
  • Cost-effective solution with a wide range of compatible libraries
Add to cart
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Original price was: ₹1,499.00.Current price is: ₹1,097.00.
In Stock
  • Compact development board powered by Raspberry Pi RP2350
  • Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
  • Supports MicroPython, C, and C++ development
  • 19 multifunction GPIOs, RGB LED, and Battery Management System
  • Ultra-low power consumption (27μA) with battery power supply
  • Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Add to cart
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Original price was: ₹1,499.00.Current price is: ₹1,116.00.
In Stock
  • Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
  • Bluetooth 5.0
  • Wireless connect
  • Onboard 2 MB flash
  • Embedded machine learning projects
Add to cart
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

Original price was: ₹299.00.Current price is: ₹219.00.
In Stock
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
  • Configurable push-pull or an open-drain output
  • The output enable pin to quickly disable all the outputs
  • Terminal block for power input
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
Add to cart
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Original price was: ₹2,000.00.Current price is: ₹1,655.00.
In Stock
  • Operating Power: 5 V/2.5 A DC via micro USB
  • 802.11 b/g/n wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
Add to cart
Raspberry Pi Compute Module 4 I/O Board

Raspberry Pi Compute Module 4 I/O Board

Original price was: ₹4,000.00.Current price is: ₹3,402.00.
In Stock
  • External power connector (+12V, +5V)
  • 2 x full-size HDMI 2.0 connectors
  • Gigabit Ethernet RJ45 with PoE support
  • Micro USB socket for updating Compute Module 4
  • PCIe Gen 2 x1 socket
Add to cart
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

Original price was: ₹599.00.Current price is: ₹499.00.
In Stock
  • Motor model:JGB37-520
  • Rated voltage:6V DC
  • Revolving Speed: 960RPM
  • Rated Torque: 0.07 kg. cm
  • Stall Torque: 0.28 kg. cm
  • Rated Current: 50 mA
  • Stall Current: 1.5A
Add to cart
3DPrintMill(CR 30) 3D Printer

3DPrintMill(CR 30) 3D Printer

₹83,999.00
In Stock
  • Print dimension 200 * 170 * ∞ mm
  • Print accuracy ± 0.1mm
  • Hotbed temperature ≤ 100 ℃
  • Nozzle temperature ≤ 240 ℃
  • Rated Power 350W
  • Supported filaments PLA / TPU / PETG
Add to cart
Creality Ender 3 V3 3D Printer

Creality Ender 3 V3 3D Printer

₹36,999.00
In Stock
  • CoreXZ for 600mm/s Printing Speed
  •  Stable Metal Build with Die-cast Parts
  •  Direct Extrusion on Full Power
  •  Integrated Tri-metal Nozzle, Quick to Swap
  •  Two Mighty Fans for Instant Cooling
  •  Auto Calibration for Leveling and More
Add to cart

Filter Products

Categories

Filter by price

Product Status