0
0 items
₹0.00
No products in the cart.
12V 4CH Relay Board
In Stock
SKU:006651- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
30A Intelligent LCD Solar Controller
In Stock
SKU:008878- Built-in Industrial Micro-Controller
- Big LCD Display
- All Adjustable Parameters
- Full 4 Stage PWM Charge Management
Buck Converter LM2596HVS DC-DC Buck Converter 4.5-50V to 3-40V
In Stock
SKU:008968- Input voltage: 4.5-50V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
XL4015 5A DC-DC Step Down Adjustable Power Supply
In Stock
SKU:008928- Input voltage range: 4V-38V DC
- Output voltage range: 1.25V-36V DC adjustable.
- Output current: 0-5A.
- Output power: 75W.
- High efficiency up to 96%
- The built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
Quectel EC200U 4G/GSM Module with GPS/GNSS
In Stock
SKU:008249- Supply Voltage (Vbat): 3.7V – 4V
- USB-C: 3.7V – 5V
- Operating temperature: -35 °C to +75 °C
- Support nano SIM card
- Support CAT 1 FDD & TDD
- Support GPRS multi-slot class 12
- Baud rates up to 921600 bps
LM2596S DC-DC Buck Converter Power Supply
In Stock
SKU:008913- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
Sim800L GSM GPRS Module
In Stock
SKU:009710- This is Sim 800L GSM - GPRS Module
- Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
- Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
- Compact size and low current consumption, ideal for small projects
- Interfaces with any microcontroller for GSM functionality
- Enables making and receiving phone calls
- Supports sending and receiving SMS messages
- Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
- TTL serial interface with automatic baud rate detection
- Power-saving features with low current consumption, including sleep mode with as low as 1mA
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker
In Stock
SKU:005158- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
NRF24L01+PA+LNA
In Stock
SKU:006683- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
2 Channel 12V High and Low Level Trigger Relay Module
In Stock
SKU:008663- Default Relay trigger Setting : Low-Level
- Logic Input (V) : 3.3 ~ 5
- Trigger Voltage (VDC) : 12
- Switching Voltage (VAC) : 250@10A
- Switching Voltage (VDC) : 30@10A
30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board
In Stock
SKU:005855- Power supply: DC 6.5-16v and USB 5V
- GVS output power supply: 5V or 3.3V
- No. Of Pins: 30PIN
- Processor Count: 2
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
In Stock
SKU:009082- Input voltage range: 5-5.5V
- Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
- Charging current: 2.4A±5%
- Boost output voltage: 5V5.15V (wire loss compensation)
- Boost output voltage ripple: 100mV
- Weight:3 gm
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
In Stock
SKU:008720- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 12V relay ON; 0-2.5V relay OFF
24V 1 Channel Relay Module
In Stock
SKU:008711- Output SPDT Relay.
- Header connector for connecting power and trigger voltage.
- LED indicates relay status.
- Screw terminal connector for easy relay output connection.
Humidity Sensitive Switch Relay Module
In Stock
SKU:008700- Maximum Voltage(V):250V AC
- Supply Current (A):150mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Opt. Relative Humidity(RH):20% ~ 85%
ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
In Stock
SKU:008691- Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
- Working Voltage: DC 5V
- Load Voltage: DC 30V 10A /AC 250V 10A
- Work Temperature: -40℃~85℃
- Work Humidity: 0%~95%RH

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















