Filter
Sort:
16×2 LCD Module (Green)

16×2 LCD Module (Green)

Original price was: ₹149.00.Current price is: ₹105.00.
In Stock
SKU:007000
  • Dimmable LED backlight with resistor or PWM
  • 16 characters, 2 rows
  • Controlled with 6 digital lines
  • Operates on 2.7V to 5.5V
  • LCD driver power: 3.0V to 11V
  • AC waveform liquid crystal drive
Add to cart
MB102 830 Points Solderless Prototype PCB Breadboard High Quality

MB102 830 Points Solderless Prototype PCB Breadboard High Quality

Original price was: ₹99.00.Current price is: ₹52.00.
In Stock
SKU:005551
  • SKU : AE1001
  1. Mb102 Bread Board
  2. 830 Solder-less Points
  3. Ideal for Experimenting With Circuit Design In Labs
  4. Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
  5. Colored coordinates for easy components placement.
Add to cart
HT12D Decoder IC

HT12D Decoder IC

Original price was: ₹99.00.Current price is: ₹56.00.
In Stock
SKU:009697
  • HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
  • In simple terms, HT12D converts the serial input into parallel outputs.
  • HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
  • The data on 4-bit latch type output pins remain unchanged until new is received.
Add to cart
W25Q64 Nor Flash Storage Module 64Mbit

W25Q64 Nor Flash Storage Module 64Mbit

Original price was: ₹99.00.Current price is: ₹64.00.
In Stock
SKU:009692
  • This is W25Q64 NorFlash Storage Module 64Mbit
  • The Working voltage is  2.7V ~ 3.6V
  • The Capacity is 64M-bit / 8M-byte.
  • The Clock frequency is <104MHz.
  • This has Greater flexibility and performance.
  • This has Low energy consumption.
  • It accompanies pin bar
Add to cart
MP3 Bluetooth 4.1 Decoder Board

MP3 Bluetooth 4.1 Decoder Board

Original price was: ₹149.00.Current price is: ₹102.00.
Out of stock
SKU:007102
  1. Operating Voltage: 3.7 – 5VDC
  2. SNR: 90dB
  3. Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Read more
Original JHD 20×4 character LCD Display with Blue Backlight

Original JHD 20×4 character LCD Display with Blue Backlight

Original price was: ₹649.00.Current price is: ₹477.00.
Out of stock
SKU:007092
  • This is Original JHD 20×4 character LCD Display with Blue Backlight
  • It is an original JHD LCD display with blue backlight and high quality.
  • The screen can be used for color, LCD, led light bar, and so on, it is easy to install and disassemble without special tools.
  • This module does not require a driver. The LCD screen will display both the character and data.
  • Black text on the Blue background
  • Single LED backlight included can be dimmed easily with a resistor or PWM.
  • Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Read more
LCD Electronic Fish Tank Water Detector Thermometer

LCD Electronic Fish Tank Water Detector Thermometer

Original price was: ₹129.00.Current price is: ₹80.00.
Out of stock
SKU:006938
  1. Temperature range: -50°C ~ +110°C
  2. Temperature display resolution: ±0.1
  3. temperature measurement accuracy: 1°C
  4. Cable Length: 1M
  5. Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
  6. Easy to use, small and handy module.
  7. The module is powered by a pair of LR44 button batteries .
Read more
Solenoid valve switch 12V DC 1/2 inch (Normally Closed)

Solenoid valve switch 12V DC 1/2 inch (Normally Closed)

Original price was: ₹349.00.Current price is: ₹197.00.
In Stock
SKU:006634
  • This is the Solenoid valve 12V
  • This is suitable for fluids like water, oil, air.
  • This prevents the dry burning and provide a steady flow
  • This is Precise and reliable.
  • This valve is Compact and convenient.
  • This is easily installed and serviced
Add to cart
6 Flexible Arms Soldering Station With Swiveling Alligator Clip

6 Flexible Arms Soldering Station With Swiveling Alligator Clip

Original price was: ₹1,899.00.Current price is: ₹1,653.00.
Out of stock
SKU:006282
  • Total Weight: 400 gm
  • Each Arm length: 34 cm
  • Alligator clip(L): 44mm (large size)
  • Alligator clips maximum thickness limit: 6mm
  • Built-in Trays for components and screws.
  • 6 flexible arms each with a large swiveling alligator clip.
  • 6+1 pockets in beautifully base to hold loose components.
  • 6 Silicon clip tips for the ultimate heat resistance.
Read more
C-4 Soldering Iron Support Stand with Cleaning Sponge

C-4 Soldering Iron Support Stand with Cleaning Sponge

Original price was: ₹249.00.Current price is: ₹163.00.
In Stock
SKU:006277
  • Heavy duty metal base featuring a reinforced spring holder.
  • Supplied complete with cleaning sponge.
  • Dimensions: 130 x 88 mm
  • Color: Black
Add to cart
Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light

Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light

Original price was: ₹549.00.Current price is: ₹517.00.
In Stock
SKU:006273
  • A useful Aid for soldering work or model makers
  • Battery required for light: 3 x AAA
  • Adjustable crocodile holding clamps
  • The bottom battery compartment is furnished with steel plate which can enhance stability
  • Ideal when a third hand is needed
  • With two LED lighting, this model can work very well in the dark environment
Add to cart
Noel 60W Temperature controlled Analog soldering Iron

Noel 60W Temperature controlled Analog soldering Iron

Original price was: ₹749.00.Current price is: ₹649.00.
In Stock
SKU:006268
  • Product: Digital soldering Iron
  • Power: 60W
  • Brand: Noel
  • Temperature controlled
  • Constant Temperature: – 200’C(392F) – 500’C(824F)
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock
SKU:006027

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

Original price was: ₹344,999.00.Current price is: ₹259,999.00.
In Stock
SKU:006016

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

Original price was: ₹224,999.00.Current price is: ₹214,999.00.
In Stock
SKU:006008
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
MAX7219 8×8 LED Dot Matrix Display Module

MAX7219 8×8 LED Dot Matrix Display Module

Original price was: ₹149.00.Current price is: ₹117.00.
In Stock
SKU:005918
  1. Driver Chip: MAX7219
  2. Input Voltage: 3.7 to 5.3 V
  3. Input Current: 320 mA
  4. Display Dimensions: 32x32x6 (LxWxH) mm
  5. PCD Dimensions: 50×32 (LxW) mm
Add to cart

Filter Products

Categories

Filter by price

Product Status