0
0 items
₹0.00
No products in the cart.
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
Out of stock
SKU:006592- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
APM 2.8 Flight Controller with Built-in Compass
In Stock
SKU:007098- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
S500 Carbon Fiber Quadcopter Drone Frame Kit
In Stock
SKU:006596- High-Quality Carbon fiber Material Frame
- Comes With Landing Gear
- Power Distribution Board Pre Installed
- Easy to Assemble kit
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
In Stock
SKU:005551- SKU : AE1001
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
HT12D Decoder IC
In Stock
SKU:009697- HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
- In simple terms, HT12D converts the serial input into parallel outputs.
- HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
- The data on 4-bit latch type output pins remain unchanged until new is received.
W25Q64 Nor Flash Storage Module 64Mbit
In Stock
SKU:009692- This is W25Q64 NorFlash Storage Module 64Mbit
- The Working voltage is 2.7V ~ 3.6V
- The Capacity is 64M-bit / 8M-byte.
- The Clock frequency is <104MHz.
- This has Greater flexibility and performance.
- This has Low energy consumption.
- It accompanies pin bar
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear
In Stock
SKU:006878 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
ZD850 Hexa-Rotor Frame for Drone
In Stock
SKU:006869- This pure carbon fiber is ideal to withstand your drone standards.
- Ultra-Lightweight and Durable.
- Made by 100% 3K Twill super strong and lightweight carbon fiber.
- The frame has excellent strength.
- The arm has multiple motor mounting holes.
S550 Hexacopter Frame
In Stock
SKU:006858-
Wheelbase: 550mm
-
Weight: 550g/720g(without/with gimbal)
-
Adopts S800 upward tilt arm design – Plastic injection moduling
-
Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
-
It comes with PCB center board of soldered
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
Solenoid valve switch 12V DC 1/2 inch (Normally Closed)
In Stock
SKU:006634- This is the Solenoid valve 12V
- This is suitable for fluids like water, oil, air.
- This prevents the dry burning and provide a steady flow
- This is Precise and reliable.
- This valve is Compact and convenient.
- This is easily installed and serviced
S500 HMF S550 Replacement Frame Arm(Black)
In Stock
SKU:006616- Material: Polyamide Nylon
- Weight: 50 gm
- Size: 233 ×40 (LxW) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatible Frame: S500 & S550
High Landing Gear For SK480 F450 F550 Quadrocopter
In Stock
SKU:006611- Color: black
- Material: ABS Plastic
- The span of the bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 4 Axis Quadcopter Frame Kit
In Stock
SKU:006606 Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Motor Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
Add to cart
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
In Stock
SKU:006601 Material: glass fiber
Compatible with MK KK flight control installment pitch of holes
Compatible with MK KK flight control system
Can connect 1-16 ESC.
Board Dimensions : 50 x 50 x 2 mm.
Weight: 8 gm.
Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
Add to cart
ZMR 250 / QAV250 Quadcopter Frame
In Stock
SKU:006586- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
F450 F550 Replacement Frame Arm(Black)
In Stock
SKU:006581- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
- Color : Black

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















