Filter
Sort:
L293D Motor Driver Module

L293D Motor Driver Module

Original price was: ₹129.00.Current price is: ₹76.00.
In Stock
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

Original price was: ₹199.00.Current price is: ₹149.00.
In Stock
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

Original price was: ₹99.00.Current price is: ₹67.00.
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

Original price was: ₹49.00.Current price is: ₹15.00.
In Stock
Add to cart
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

Original price was: ₹299.00.Current price is: ₹219.00.
In Stock
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
  • Configurable push-pull or an open-drain output
  • The output enable pin to quickly disable all the outputs
  • Terminal block for power input
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
Add to cart
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Original price was: ₹2,000.00.Current price is: ₹1,655.00.
In Stock
  • Operating Power: 5 V/2.5 A DC via micro USB
  • 802.11 b/g/n wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
Add to cart
OE-775 Hall Effect Two Channel Magnetic Encoder

OE-775 Hall Effect Two Channel Magnetic Encoder

Original price was: ₹445.00.Current price is: ₹345.00.
In Stock
Add to cart
801S Vibration Shock Sensor Module

801S Vibration Shock Sensor Module

Original price was: ₹285.00.Current price is: ₹185.00.
In Stock
  • Has a signal output instruction
  • When the output valid signal is high, the light goes out
  • The sensitivity is adjustable (fine-tuning)
  • The wide detection range of vibration, no direction
  • With mounting holes, firmware installation is flexible and convenient.
Add to cart
Raspberry Pi Compute Module 4 I/O Board

Raspberry Pi Compute Module 4 I/O Board

Original price was: ₹4,000.00.Current price is: ₹3,402.00.
In Stock
  • External power connector (+12V, +5V)
  • 2 x full-size HDMI 2.0 connectors
  • Gigabit Ethernet RJ45 with PoE support
  • Micro USB socket for updating Compute Module 4
  • PCIe Gen 2 x1 socket
Add to cart
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

Original price was: ₹599.00.Current price is: ₹499.00.
In Stock
  • Motor model:JGB37-520
  • Rated voltage:6V DC
  • Revolving Speed: 960RPM
  • Rated Torque: 0.07 kg. cm
  • Stall Torque: 0.28 kg. cm
  • Rated Current: 50 mA
  • Stall Current: 1.5A
Add to cart
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

Original price was: ₹499.00.Current price is: ₹377.00.
In Stock
  1. Motor KV: 1000
  2. Current Capacity: 12A/ 60S
  3. LiPO Batteries: 2S-3S
  4. Max. Efficiency Current: 4-10A
  5. Shaft Diameter: 3.17 mm
Add to cart
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

Original price was: ₹499.00.Current price is: ₹403.00.
In Stock
  1. odel: A2212/10T
  2. Motor KV: 1400
  3. Max. Efficiency Current: 6-12A
  4. No Load Current: 0.7A @10V
  5. Current Capacity: 16A/60S
  6. LiPO Batteries: 2S-3S
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

₹399,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

₹259,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

₹224,999.00
In Stock
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart

Filter Products

Categories

Filter by price

Product Status