Filter
Sort:
Tactile Push Button Switch Assorted Kit – 25 pcs

Tactile Push Button Switch Assorted Kit – 25 pcs

₹140.00
In Stock
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

₹399,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

₹259,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

₹224,999.00
In Stock
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
MAX7219 8×8 LED Dot Matrix Display Module

MAX7219 8×8 LED Dot Matrix Display Module

₹118.00
In Stock
  1. Driver Chip: MAX7219
  2. Input Voltage: 3.7 to 5.3 V
  3. Input Current: 320 mA
  4. Display Dimensions: 32x32x6 (LxWxH) mm
  5. PCD Dimensions: 50×32 (LxW) mm
Add to cart
TM1637 4 Bits Digital Tube LED Display Module

TM1637 4 Bits Digital Tube LED Display Module

₹49.00
In Stock
Add to cart
7Semi Mini ATmega328P Board – 5V

7Semi Mini ATmega328P Board – 5V

₹238.00
In Stock
  1. Microcontroller: ATmega328
  2. Circuit Operating Voltage: 5V
  3. Clock frequency: 16MHz.
  4. Digital I/O Pins: 14
  5. 8 analog input port: A0 ~ A7.
  6. A pair of TTL level serial port transceiver : RX / TX.
  7. 6 PWM port: D3, D5, D6, D9, D10, D11.
  8. Support serial download.
Add to cart
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

₹1,235.00
In Stock
Add to cart
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

₹188.00
In Stock
  1. Operating Voltage (logic level): 5V
  2. 8 analog inputs ports: A0 ~ A7
  3. 14 Digital input / output ports: TX, RX, D2 ~ D13
  4. 1 pair of TTL level serial transceiver ports RX / TX
  5. Using Atmel Atmega328P-AU MCU
  6. There is a bootloader installed in it
  7. Standard 0.1” spacing DIP (breadboard friendly).
  8. Manual reset switch.
Add to cart
UNO Based ESP8266 Nodemcu Development Board

UNO Based ESP8266 Nodemcu Development Board

₹230.00
In Stock
  1. Based on ESP-8266EX.
  2. Arduino compatible, using Arduino IDE to program.
  3. Support OTA wireless upload.
  4. Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
  5. The direct use of Arduino IDE development, the same operation with Arduino UNO.
  6. Operating Voltage: 3.3V
  7. Digital I/O Pins: 11
  8. Analog Input Pins: 1
Add to cart
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

₹365.00
In Stock
  1. Microcontroller: ATmega168 or ATmega328V
  2. Operating Voltage: 2.7-5.5 V
  3. Digital I/O Pins: 14
  4. PWM Channels: 6
  5. Analog Input Channels: 6
  6. DC Current per I/O Pin: 40 mA
  7. Board will run from 2V to 5V.
  8. The latest version of the LilyPad supports automatic reset for even easier programming.
  9. The back side of the LilyPad is now completely flat!
Add to cart
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

₹1,335.00
In Stock
  1. Microcontroller: ATmega2560
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 6-20V
  5. Digital I/O Pins: 54 (of which 15 provide PWM output)
  6. Analog Input Pins: 16
  7. DC Current per I/O Pin: 40 mA
  8. DC Current for 3.3V Pin: 50 mA
Add to cart
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

₹1,199.00
In Stock
  1. Microcontroller CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. Dimensions : 111 x 54 x 12 (LxWxH) mm.
Add to cart
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

₹236.00
In Stock
  1. Microcontroller ATmega328 (SMD) – Interface CH340G
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 5-20V
  5. Digital I / O Pins 14 (of which 6 provide PWM output)
  6. Analog Input Pins: 6
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

₹493.00
In Stock
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart

Filter Products

Categories

Filter by price

Product Status