Filter
Sort:
L293D Motor Driver Module

L293D Motor Driver Module

Original price was: ₹129.00.Current price is: ₹76.00.
In Stock
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

Original price was: ₹199.00.Current price is: ₹149.00.
In Stock
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

Original price was: ₹99.00.Current price is: ₹67.00.
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

Original price was: ₹49.00.Current price is: ₹15.00.
In Stock
Add to cart
F450 F550 Replacement Frame Arm (White)

F450 F550 Replacement Frame Arm (White)

Original price was: ₹149.00.Current price is: ₹115.00.
In Stock
  1. Material: Polyamide Nylon+ Glass Fiber
  2. Weight: 50 gm
  3. Size: 220×40 (L x W) mm
  4. Motor Mounting Holes Dia.: 3 mm
  5. Compatibility: F450/F550 & Q450/Q550
Add to cart
F450 F550 Replacement Frame Arm (Red)

F450 F550 Replacement Frame Arm (Red)

Original price was: ₹599.00.Current price is: ₹110.00.
In Stock
  • Material: Polyamide Nylon+ Glass Fiber
  • Weight: 50 gm
  • Size: 220×40 (L x W) mm
  • Motor Mounting Holes Dia.: 3 mm
  • Compatibility: F450/F550 & Q450/Q550
Add to cart
PAM 8403 Amplifier Module with Knob

PAM 8403 Amplifier Module with Knob

Original price was: ₹79.00.Current price is: ₹61.00.
In Stock
  • Operating voltage: 2.5V-5.5V
  • Maximum output power: 3W x 2
  • PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
  • Built with switch Potentiometer, can adjust the volume & control power switch freely!
  • Flexible assembly usage.
Add to cart
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive

4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive

Original price was: ₹549.00.Current price is: ₹430.00.
In Stock
  • Part Number: G3MB-202P
  • Power supply:5VDC/160mA
  • Trigger Voltage (VDC):5
  • Switching Voltage (VAC):240@2A
  • Isolation: Phototriac
Add to cart
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

Original price was: ₹299.00.Current price is: ₹219.00.
In Stock
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
  • Configurable push-pull or an open-drain output
  • The output enable pin to quickly disable all the outputs
  • Terminal block for power input
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
Add to cart
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion

DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion

Original price was: ₹69.00.Current price is: ₹37.00.
In Stock
  • nput Voltage: 12V
  • Connector: 5.5mm DC Jack
  • Output power on/off switch
  • Two-row multiple pin outputs, easy to use and connect
Add to cart
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

Original price was: ₹599.00.Current price is: ₹499.00.
In Stock
  • Motor model:JGB37-520
  • Rated voltage:6V DC
  • Revolving Speed: 960RPM
  • Rated Torque: 0.07 kg. cm
  • Stall Torque: 0.28 kg. cm
  • Rated Current: 50 mA
  • Stall Current: 1.5A
Add to cart
3DPrintMill(CR 30) 3D Printer

3DPrintMill(CR 30) 3D Printer

₹83,999.00
In Stock
  • Print dimension 200 * 170 * ∞ mm
  • Print accuracy ± 0.1mm
  • Hotbed temperature ≤ 100 ℃
  • Nozzle temperature ≤ 240 ℃
  • Rated Power 350W
  • Supported filaments PLA / TPU / PETG
Add to cart
Creality Ender 3 V3 3D Printer

Creality Ender 3 V3 3D Printer

₹36,999.00
In Stock
  • CoreXZ for 600mm/s Printing Speed
  •  Stable Metal Build with Die-cast Parts
  •  Direct Extrusion on Full Power
  •  Integrated Tri-metal Nozzle, Quick to Swap
  •  Two Mighty Fans for Instant Cooling
  •  Auto Calibration for Leveling and More
Add to cart
Ender-3 V3 Plus 3D Printer

Ender-3 V3 Plus 3D Printer

₹51,999.00
In Stock
  • Printing Technology: FDM
  • Build Volume: 300*300*330mm
  • Product Dimensions: 410*445*577mm
  • Input Shaping: Yes (G-sensor included)
  • Connectivity: WiFi
  • Printing Speed: ≤600mm/s
Add to cart
Creality K2 Plus Combo 3D Printer

Creality K2 Plus Combo 3D Printer

₹163,999.00
In Stock
  • Model: Creality K2 Plus Combo 3D Printer
  • High-flow hotend (40mm³/s)
  • Auto-leveling for perfect first layer
  • CFS compatibility for multi-color printing
  • WiFi & USB connectivity
  • Dual AI cameras for smart monitoring
Add to cart
Creality HALOT R6 Resin 3D Printer

Creality HALOT R6 Resin 3D Printer

₹13,999.00
In Stock
  •  Easy to Use for Beginners
  •  Small Size, Robust Design
  • Quality Light Source and Z-axis
  • Light Uniformity＞90%
  • More Thoughtful Details：Anti-UV Lid | Anti-slip Bolts | Dual Vat Spouts |Tempered Glass Protector
Add to cart

Filter Products

Categories

Filter by price

Product Status