0
0 items
₹0.00
No products in the cart.
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
PCA9685 16 Channel Servo Motor Drive
In Stock
- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
BTS7960B 43A H-Bridge Motor Driver
In Stock
- This is BTS7960B 43A H-Bridge Motor Driver
- Double BTS7960 large current (43 A) H bridge driver
- The supply voltage: 5.5V to 27V
- This has Overtemperature shut down with latch behavior
- This has Overvoltage lockout and Undervoltage shut down
- The Driver circuit with logic level inputs.
- This has an onboard 5V power indicator
- This has a driver circuit with logic-level inputs.
Raspberry Pi USB Plug and Play Desktop Microphone
In Stock
- USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
- Designed to filter out background noises for crisp, clear audio
- Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
- Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
- Flexible neck to adjust your convenient direction and Height for talking.
- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
NEO-6M GPS Module with EPROM
In Stock
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
S500 HMF S550 Replacement Frame Arm(Black)
In Stock
- Material: Polyamide Nylon
- Weight: 50 gm
- Size: 233 ×40 (LxW) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatible Frame: S500 & S550
High Landing Gear For SK480 F450 F550 Quadrocopter
In Stock
- Color: black
- Material: ABS Plastic
- The span of the bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 4 Axis Quadcopter Frame Kit
In Stock
Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Motor Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
Add to cart
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
In Stock
Material: glass fiber
Compatible with MK KK flight control installment pitch of holes
Compatible with MK KK flight control system
Can connect 1-16 ESC.
Board Dimensions : 50 x 50 x 2 mm.
Weight: 8 gm.
Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
Add to cart
S500 Carbon Fiber Quadcopter Drone Frame Kit
In Stock
- High-Quality Carbon fiber Material Frame
- Comes With Landing Gear
- Power Distribution Board Pre Installed
- Easy to Assemble kit
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
In Stock
- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
ZMR 250 / QAV250 Quadcopter Frame
In Stock
- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















