0
0 items
₹0.00
No products in the cart.
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
Robot Car Wheel 100mm x 20mm
In Stock
SKU:006678AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
Quectel EC200U 4G/GSM Module with GPS/GNSS
In Stock
SKU:008249- Supply Voltage (Vbat): 3.7V – 4V
- USB-C: 3.7V – 5V
- Operating temperature: -35 °C to +75 °C
- Support nano SIM card
- Support CAT 1 FDD & TDD
- Support GPRS multi-slot class 12
- Baud rates up to 921600 bps
Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long
Out of stock
SKU:00756410 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
DIY Acrylic Robot Manipulator Mechanical Arm Kit (not-including Servo and Board)
In Stock
SKU:007293- Material: Acrylic
- Affordable 4-DOF manipulators.
- Highly versatile mechanical parts.
- Wood board laser cutting with precision.
- Easy to assemble.
Adafruit STEMMA QT / Qwiic JST SH 4-pin Cable – 100mm Long
Out of stock
SKU:007558Sim800L GSM GPRS Module
In Stock
SKU:009710- This is Sim 800L GSM - GPRS Module
- Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
- Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
- Compact size and low current consumption, ideal for small projects
- Interfaces with any microcontroller for GSM functionality
- Enables making and receiving phone calls
- Supports sending and receiving SMS messages
- Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
- TTL serial interface with automatic baud rate detection
- Power-saving features with low current consumption, including sleep mode with as low as 1mA
Bambu Lab A1 Mini 3D Printer
In Stock
SKU:005941- Plug-N-Play Convenience
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High-Speed Precision
- Active Flow Rate Compensation
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker
In Stock
SKU:005158- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
NRF24L01+PA+LNA
In Stock
SKU:006683- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
ESP32-WROOM-32 38Pin Development Board
Out of stock
SKU:007840
WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
Read more
10 CM 40 Pin Dupont Cable Male/Male, Male/Female, Female/Female Cable Combo
In Stock
SKU:007475- 40P color DuPont line
- Length: 100mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















