Filter
Sort:
High quality 130 micro motor high speed strong magnetic carbon brush

High quality 130 micro motor high speed strong magnetic carbon brush

₹99.00
In Stock
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

₹149.00
In Stock
Add to cart
RS385 385 High Speed 12V – 24V 10000RPM – 20500RPM DC Motor

RS385 385 High Speed 12V – 24V 10000RPM – 20500RPM DC Motor

₹142.00
In Stock
  • Speed: ‎10000 RPM
  • Rated voltage: 12(V),
  • Rated current: 0.15-0.75 (A).
  • Rated speed: 10000 (rpm)
  • Rated Torque: 70 (g. cm).
  • Shaft Type: Round
  • shaft Length: 13mm
  • shaft Diameter: 2mm
  • Motor Length: 56mm
  • Motor Diameter: 27mm
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

₹67.00
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

₹15.00
In Stock
Add to cart
GSM SIM800C Modem with Antenna

GSM SIM800C Modem with Antenna

₹1,045.00
In Stock
  • Supply Voltage (V): 3.4 ~ 12
  • GSM (MHz): 850, 900, 1800 and 1900
  • Flash Memory (MB): 24
  • RAM Memory (MB): 32
Add to cart
TTGO T-Call V1.4 ESP32 SIM800L Wireless Communication Module

TTGO T-Call V1.4 ESP32 SIM800L Wireless Communication Module

₹2,039.00
In Stock
  • Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
  • FLASH: QSPI flash 4MB / PSRAM 8MB
  • SRAM:520 kB SRAM
  • Button: Reset
  • USB to TTL: CP2104
  • Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
  • On-board clock:40MHz crystal oscillator
  • Working voltage:2.7V-3.6V
Add to cart
RF433 MHz Transmitter Receiver Wireless Module

RF433 MHz Transmitter Receiver Wireless Module

₹163.00
In Stock
  • Range in open space: 30 Meters
  • RX IF Frequency: 1MHz
  • Very Stable Operating Frequency
  • Low Current Consumption (Typ 11mA)
  • Wide Operating Voltage (1.5-5v)
Add to cart
RF Transmitter Receiver Module 433MHz Wireless Link Kit

RF Transmitter Receiver Module 433MHz Wireless Link Kit

₹78.00
In Stock
  • Operating voltage: 5V.
  • Quiescent Current: 4mA.
  • Receiving frequency: 433 MHz.
  • Receiver sensitivity: -105 dB.
  • Communication Distance (m): 20 ~ 200 meter.
Add to cart
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader

JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader

₹455.00
In Stock
  • Frequency: 125Khz.
  • Support μEM4001, 4100, or its compatible RFID, ID card.
  • Read first 10 digits of the RFID/Proximity card.
  • Support Windows95/98/2000/XP/7/8.
  • Plug and Play
  • Reliable working condition
  • Powered directly from USB, no need external power supply
Add to cart
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

₹402.00
In Stock
  1. Motor KV: 1000
  2. Current Capacity: 12A/ 60S
  3. LiPO Batteries: 2S-3S
  4. Max. Efficiency Current: 4-10A
  5. Shaft Diameter: 3.17 mm
Add to cart
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

₹403.00
In Stock
  1. odel: A2212/10T
  2. Motor KV: 1400
  3. Max. Efficiency Current: 6-12A
  4. No Load Current: 0.7A @10V
  5. Current Capacity: 16A/60S
  6. LiPO Batteries: 2S-3S
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

₹399,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

₹259,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

₹224,999.00
In Stock
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart

Filter Products

Categories

Filter by price

Product Status