Filter
Sort:
L293D Motor Driver Module

L293D Motor Driver Module

Original price was: ₹129.00.Current price is: ₹76.00.
In Stock
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

Original price was: ₹199.00.Current price is: ₹149.00.
In Stock
Add to cart
RS385 385 High Speed 12V – 24V 10000RPM – 20500RPM DC Motor

RS385 385 High Speed 12V – 24V 10000RPM – 20500RPM DC Motor

Original price was: ₹199.00.Current price is: ₹142.00.
In Stock
  • Speed: ‎10000 RPM
  • Rated voltage: 12(V),
  • Rated current: 0.15-0.75 (A).
  • Rated speed: 10000 (rpm)
  • Rated Torque: 70 (g. cm).
  • Shaft Type: Round
  • shaft Length: 13mm
  • shaft Diameter: 2mm
  • Motor Length: 56mm
  • Motor Diameter: 27mm
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

Original price was: ₹99.00.Current price is: ₹67.00.
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

Original price was: ₹49.00.Current price is: ₹15.00.
In Stock
Add to cart
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

Original price was: ₹299.00.Current price is: ₹219.00.
In Stock
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
  • Configurable push-pull or an open-drain output
  • The output enable pin to quickly disable all the outputs
  • Terminal block for power input
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
Add to cart
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth

Original price was: ₹2,000.00.Current price is: ₹1,655.00.
In Stock
  • Operating Power: 5 V/2.5 A DC via micro USB
  • 802.11 b/g/n wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
Add to cart
OE-775 Hall Effect Two Channel Magnetic Encoder

OE-775 Hall Effect Two Channel Magnetic Encoder

Original price was: ₹445.00.Current price is: ₹345.00.
In Stock
Add to cart
801S Vibration Shock Sensor Module

801S Vibration Shock Sensor Module

Original price was: ₹285.00.Current price is: ₹185.00.
In Stock
  • Has a signal output instruction
  • When the output valid signal is high, the light goes out
  • The sensitivity is adjustable (fine-tuning)
  • The wide detection range of vibration, no direction
  • With mounting holes, firmware installation is flexible and convenient.
Add to cart
Raspberry Pi Compute Module 4 I/O Board

Raspberry Pi Compute Module 4 I/O Board

Original price was: ₹4,000.00.Current price is: ₹3,402.00.
In Stock
  • External power connector (+12V, +5V)
  • 2 x full-size HDMI 2.0 connectors
  • Gigabit Ethernet RJ45 with PoE support
  • Micro USB socket for updating Compute Module 4
  • PCIe Gen 2 x1 socket
Add to cart
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor

Original price was: ₹599.00.Current price is: ₹499.00.
In Stock
  • Motor model:JGB37-520
  • Rated voltage:6V DC
  • Revolving Speed: 960RPM
  • Rated Torque: 0.07 kg. cm
  • Stall Torque: 0.28 kg. cm
  • Rated Current: 50 mA
  • Stall Current: 1.5A
Add to cart
3DPrintMill(CR 30) 3D Printer

3DPrintMill(CR 30) 3D Printer

₹83,999.00
In Stock
  • Print dimension 200 * 170 * ∞ mm
  • Print accuracy ± 0.1mm
  • Hotbed temperature ≤ 100 ℃
  • Nozzle temperature ≤ 240 ℃
  • Rated Power 350W
  • Supported filaments PLA / TPU / PETG
Add to cart
Creality Ender 3 V3 3D Printer

Creality Ender 3 V3 3D Printer

₹36,999.00
In Stock
  • CoreXZ for 600mm/s Printing Speed
  •  Stable Metal Build with Die-cast Parts
  •  Direct Extrusion on Full Power
  •  Integrated Tri-metal Nozzle, Quick to Swap
  •  Two Mighty Fans for Instant Cooling
  •  Auto Calibration for Leveling and More
Add to cart
Ender-3 V3 Plus 3D Printer

Ender-3 V3 Plus 3D Printer

₹51,999.00
In Stock
  • Printing Technology: FDM
  • Build Volume: 300*300*330mm
  • Product Dimensions: 410*445*577mm
  • Input Shaping: Yes (G-sensor included)
  • Connectivity: WiFi
  • Printing Speed: ≤600mm/s
Add to cart
Creality K2 Plus Combo 3D Printer

Creality K2 Plus Combo 3D Printer

₹163,999.00
In Stock
  • Model: Creality K2 Plus Combo 3D Printer
  • High-flow hotend (40mm³/s)
  • Auto-leveling for perfect first layer
  • CFS compatibility for multi-color printing
  • WiFi & USB connectivity
  • Dual AI cameras for smart monitoring
Add to cart
Creality HALOT R6 Resin 3D Printer

Creality HALOT R6 Resin 3D Printer

₹13,999.00
In Stock
  •  Easy to Use for Beginners
  •  Small Size, Robust Design
  • Quality Light Source and Z-axis
  • Light Uniformity＞90%
  • More Thoughtful Details：Anti-UV Lid | Anti-slip Bolts | Dual Vat Spouts |Tempered Glass Protector
Add to cart

Filter Products

Categories

Filter by price

Product Status