0
0 items
₹0.00
No products in the cart.
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
In Stock
- SKU : AE1001
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
PCA9685 16 Channel Servo Motor Drive
In Stock
- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
BTS7960B 43A H-Bridge Motor Driver
In Stock
- This is BTS7960B 43A H-Bridge Motor Driver
- Double BTS7960 large current (43 A) H bridge driver
- The supply voltage: 5.5V to 27V
- This has Overtemperature shut down with latch behavior
- This has Overvoltage lockout and Undervoltage shut down
- The Driver circuit with logic level inputs.
- This has an onboard 5V power indicator
- This has a driver circuit with logic-level inputs.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
P45 Small Float Level Control Switch Plastic Float Switch
In Stock
- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.
NEO-6M GPS Module with EPROM
In Stock
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
GY-302 BH1750 Light Intensity Module
In Stock
- No ambient light distinction
- High precision determination accurate to 1 Lux for different lights
- ROHM original package BH1750FVI chip
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interfac
Solenoid valve switch 12V DC 1/2 inch (Normally Closed)
In Stock
- This is the Solenoid valve 12V
- This is suitable for fluids like water, oil, air.
- This prevents the dry burning and provide a steady flow
- This is Precise and reliable.
- This valve is Compact and convenient.
- This is easily installed and serviced
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0
In Stock
- Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
- Supports Wi-Fi & Bluetooth 5.0 connectivity
- Built-in 2.4GHz rod antenna for a stable signal
- Ultra-low power consumption with deep sleep mode (14μA)
- Integrated lithium battery charging management
- Compact ESP32 S3 development board ideal for IoT and robotics
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
In Stock
- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio
In Stock
- Smart AI vision camera solution for edge AI applications
- Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
- Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
- Supports TensorFlow & PyTorch frameworks
- Compatible with Arduino IDE for easy development
- No-code model deployment and real-time inference visualization via SenseCraft AI
- Comes in a custom 3D-printed enclosure

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















