19
19 items
₹193,483.00
Subtotal: ₹193,483.00
Hurray! Your order qualifies for free shipping!
19
Subtotal: ₹193,483.00
Hurray! Your order qualifies for free shipping!
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
F450 F550 Replacement Frame Arm (White)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
F450 F550 Replacement Frame Arm (Red)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
PAM 8403 Amplifier Module with Knob
In Stock
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
OE-775 Hall Effect Two Channel Magnetic Encoder
In Stock
801S Vibration Shock Sensor Module
In Stock
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
KK board 2.1.5 Multi-Rotor LCD Flight Control Board
In Stock
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















