4
				  4 items
					
				
				₹20,794.00
Subtotal: ₹20,794.00
Hurray! Your order qualifies for free shipping!
4
				Subtotal: ₹20,794.00
Hurray! Your order qualifies for free shipping!
		“16×2 LCD Module (Green)” has been added to your cart. View cart	
	
		“Jetson Nano Development Board 4 GB 16 GB eMMC” has been added to your cart. View cart	
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266
 In Stock
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
SN04-N NPN NO 5mm Distance Detector Proximity Sensor Switch Module
 In Stock
- Operating Voltage(V): 10 ~30
- Current Consumption Max: 5 mA
- Detection distance(mm): 5 mm.
- Type of detection: Inductive.
- Cable Length: 145 cm.
- Response Frequency: 500Hz Max.
- Protection class: IP 67.
L293D Motor Driver/Servo Shield for Arduino
 In Stock
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
STC-3028 Digital Temperature Humidity Controller 110-220V
 In Stock
- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators
3S 12V 25A 18650 Lithium Battery Protection Board
 In Stock
- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
 In Stock
- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
DC 5V Ultrasonic Humidifier USB Spray Module DIY Incubation Experiment 108KHz
 In Stock
- DC 24V 36mm Super Ultrasonic Mist Maker Humidifier Atomizer
- Comes with a built-in driver circuit for easy and direct operation
- Automatically starts misting upon power-on (triggered by power supply)
- Operates at 108KHz high-frequency for efficient ultrasonic atomization
- Micron-level spray aperture produces fine 5μm water mist particles
- Glazed surface on the atomizing sheet enhances durability and mist quality
110V~ 220V AC All-Purpose Temperature Control Controller with Sensor 2 Relay Output Thermostat Stc-1000
 In Stock
- Mini Temperature Controller is an excellent and convenient multifunction device for controlling the temperature in Aquariums.
- The stability of aquarium temperature is one of the crucial factors that contribute to the health and safety of your fish.
- By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish.
- This advanced temperature controller can measure and control temperature from -50 to 90 °C.
- This device is also suitable for Laboratories use and other temperature-controlled systems.
4.8-6V Servo Motor Tester
 In Stock
- This is 4.8-6V Servo Motor Tester
- This offer 3 modes to check servos or ESC
- This servo motor tester connect to up to 3 servos simultaneously
- This can connect up to 3 ESCs to test and compare their reaction time respectively
- This servo motor tester is built with LED indicators
Jetson Nano Development Board 4 GB 16 GB eMMC
 In Stock
- Compact & Streamlined Design – Simplifies the carrier board with essential ports, making it easier to use and more cost-efficient.
- Stable Performance with eMMC – Built-in 16GB eMMC memory ensures faster and more reliable read/write performance compared to TF card storage.
- Flexible Boot Options – Supports both USB flash drive booting and TF card booting, giving users versatile setup choices.
- Convenient Power Management – Direct DC power input without jumper caps, making the power supply connection simple and user-friendly.
- Onboard Control Buttons – Integrated Power and Reset buttons allow quick system operation and troubleshooting.
- Optimized Port Configuration – 1 × USB 3.0, 2 × USB 2.0, and 1 × CSI port provide necessary connectivity without excessive interfaces.
- Form Factor Compatibility – Carrier board design aligns with the official Jetson Nano 2GB Developer Kit, ensuring smooth integration into existing setups.
- Expandable Storage – Includes a TF card slot on the expansion board for additional storage flexibility.
- Optional Core Module – Can be paired with or without the Jetson Nano 4GB module, depending on project needs.
- Ideal for Practical Development – Suited for students, educators, engineers, and hobbyists who need a stable and simplified development platform.
Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
 In Stock
- Maximum current: 7.2A, resolution: 0.1A
- Impulse response frequency: 200KHz
- DC power supply
- The input voltage range: 20-50 VDC.
- Power supply is greater than 200W. Recommend 20-50 VDC
- Operating Temperature: -10℃~45℃
1.8 Inch TFT LCD Module 128 x 160 with 4 IO
 In Stock
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 57×34 (LxW)
- Interface Type: SPI
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
 In Stock
- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
Official Arduino Uno R3 SMD Microcontroller Board – A000073
 In Stock
- Microcontroller board featuring an ATmega328P in an SMD package
- Provides 14 digital input/output pins, with 6 capable of PWM output
- Includes 6 analog input pins for reading sensor data
- Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
- Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
- Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
- The SMD Arduino Uno version of the popular Arduino Uno board
MP3 Bluetooth 4.1 Decoder Board
 In Stock
- Operating Voltage: 3.7 – 5VDC
- SNR: 90dB
- Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.
 
													 
									 
									 
									














