Filter
Sort:
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

Original price was: ₹199.00.Current price is: ₹147.00.
In Stock
  1. Use BRT (Bias Resistor Transistor)
  2. Easier into flash mode.
  3.  30% increase in radiating area
  4. Good stability.

Add to cart
L293D Motor Driver/Servo Shield for Arduino

L293D Motor Driver/Servo Shield for Arduino

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
Jetson Nano Development Board 4 GB 16 GB eMMC

Jetson Nano Development Board 4 GB 16 GB eMMC

Original price was: ₹24,999.00.Current price is: ₹20,497.00.
In Stock
  • Compact & Streamlined Design – Simplifies the carrier board with essential ports, making it easier to use and more cost-efficient.
  • Stable Performance with eMMC – Built-in 16GB eMMC memory ensures faster and more reliable read/write performance compared to TF card storage.
  • Flexible Boot Options – Supports both USB flash drive booting and TF card booting, giving users versatile setup choices.
  • Convenient Power Management – Direct DC power input without jumper caps, making the power supply connection simple and user-friendly.
  • Onboard Control Buttons – Integrated Power and Reset buttons allow quick system operation and troubleshooting.
  • Optimized Port Configuration – 1 × USB 3.0, 2 × USB 2.0, and 1 × CSI port provide necessary connectivity without excessive interfaces.
  • Form Factor Compatibility – Carrier board design aligns with the official Jetson Nano 2GB Developer Kit, ensuring smooth integration into existing setups.
  • Expandable Storage – Includes a TF card slot on the expansion board for additional storage flexibility.
  • Optional Core Module – Can be paired with or without the Jetson Nano 4GB module, depending on project needs.
  • Ideal for Practical Development – Suited for students, educators, engineers, and hobbyists who need a stable and simplified development platform.
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
Official Arduino Uno R3 SMD Microcontroller Board – A000073

Official Arduino Uno R3 SMD Microcontroller Board – A000073

Original price was: ₹2,499.00.Current price is: ₹1,837.00.
In Stock
  • Microcontroller board featuring an ATmega328P in an SMD package
  • Provides 14 digital input/output pins, with 6 capable of PWM output
  • Includes 6 analog input pins for reading sensor data
  • Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
  • Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
  • Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
  • The SMD Arduino Uno version of the popular Arduino Uno board
Add to cart
Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Original price was: ₹349.00.Current price is: ₹217.00.
In Stock
  • This is the Uno R3 CH340G Development Board with Micro USB port compatible with Arduino
  • This UNO R3 board is based on ATmega328p microcontroller.
  • This board comes with a Micro USB port for powering the board.
  • This board has an operating voltage of 5V and features a 14 digital I/O pins.
  • The UNO board is integarted with 6 analog pins and 32Kb flash memory.
Add to cart
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

Original price was: ₹149.00.Current price is: ₹118.00.
In Stock
  • Module PCB size: 3.6cm * 2.3cm
  • PCF8591 operating voltage range of 2.5V to 6V
  • 4 analog inputs programmable as single-ended or differential inputs
  • VCC power supply interface external 3.3v-5v
  • 8-bit successive approximation A / D converter through an analog output DAC gain
Add to cart
SIM800L V2 GSM GPRS Module

SIM800L V2 GSM GPRS Module

Original price was: ₹649.00.Current price is: ₹462.00.
In Stock
  • Supports GSM (voice, SMS) and GPRS
  • Quad-band (850/900/1800/1900 MHz) for global use
  • Compatible with Arduino, with built-in regulator and TTL converter
  • Compact design for versatile applications
  • Easy SIM replacement with card slot
  • Gold-plated board for stability
Add to cart
HC-05 Bluetooth Module

HC-05 Bluetooth Module

Original price was: ₹349.00.Current price is: ₹225.00.
In Stock
  • Provide seamless wireless communication in various applications like GPS navigation systems, water meter readings, and electricity gas meter readings.
  • This Bluetooth module allows you to easily switch between Master and Slave modes using AT Commands.
  • Connect effortlessly with a wide range of devices such as Arduino, phones, laptops, and microcontrollers for a competitive price.
  • The module uses USART for communication, making it compatible with microcontrollers supporting USART.
  • You can easily configure the module's settings using the command mode, giving you control over your wireless connections.
  • Perfect for connecting computers, mobile phones, and microcontrollers for data exchange and DIY, IoT, and Robotics Projects
Add to cart
Roboway 4-Way ON/Off 220V-240V Light Digital Remote-Control Wireless Wall Switch with RF Remote Control (RW-RF031)

Roboway 4-Way ON/Off 220V-240V Light Digital Remote-Control Wireless Wall Switch with RF Remote Control (RW-RF031)

Original price was: ₹399.00.Current price is: ₹336.00.
In Stock
Item Type:m4 Way On/Off 220V-240V Light Digital Remote- control wireless wall switch with RF remote control Colour: white Item weight Unit of measure: Grams  
Add to cart
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

Original price was: ₹499.00.Current price is: ₹346.00.
In Stock
  • Equips you with robust Wi-Fi and Bluetooth capabilities.
  • Can easily integrate into other products with 30-pin design.
  • Choose between AP, STA, or AP+STA modes.
  • The support for Lua programming simplifies development.
  • This board includes a CP2102 USB-UART bridge.
  • Powered by the ESP32S chip.
  • Offers scalable and adaptive features with adjustable clock frequencies.
  • Ideal for various applications.
Add to cart
Raspberry Pi USB Plug and Play Desktop Microphone

Raspberry Pi USB Plug and Play Desktop Microphone

Original price was: ₹349.00.Current price is: ₹177.00.
In Stock
  1. USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
  2. Designed to filter out background noises for crisp, clear audio
  3. Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
  4. Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
  5. Flexible neck to adjust your convenient direction and Height for talking.
Add to cart
NRF24L01+PA+LNA

NRF24L01+PA+LNA

Original price was: ₹199.00.Current price is: ₹133.00.
In Stock
  • This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
  • Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
  • Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
  • Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
  • Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
  • Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
  • Low cost and software programming is fully compatible with NRF24L01 modules.
Add to cart
NEO-6M GPS Module with EPROM

NEO-6M GPS Module with EPROM

Original price was: ₹399.00.Current price is: ₹237.00.
In Stock
  1. 5Hz position update rate.
  2. The cold start time of 38 s and Hot start time of 1 s.
  3. Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
  4. Super Sense Indoor GPS: -162 dBm tracking sensitivity.
  5. Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
  6. Separated 18 x 18mm GPS antenna.
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
In Stock
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Add to cart
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
In Stock
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Add to cart

Filter Products

Categories

Filter by price

Product Status