“Raspberry Pi USB Plug and Play Desktop Microphone” has been added to your cart. View cart
L293D Motor Driver/Servo Shield for Arduino
In Stock
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
STC-3028 Digital Temperature Humidity Controller 110-220V
In Stock
- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators
110V~ 220V AC All-Purpose Temperature Control Controller with Sensor 2 Relay Output Thermostat Stc-1000
In Stock
- Mini Temperature Controller is an excellent and convenient multifunction device for controlling the temperature in Aquariums.
- The stability of aquarium temperature is one of the crucial factors that contribute to the health and safety of your fish.
- By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish.
- This advanced temperature controller can measure and control temperature from -50 to 90 °C.
- This device is also suitable for Laboratories use and other temperature-controlled systems.
Jetson Nano Development Board 4 GB 16 GB eMMC
In Stock
- Compact & Streamlined Design – Simplifies the carrier board with essential ports, making it easier to use and more cost-efficient.
- Stable Performance with eMMC – Built-in 16GB eMMC memory ensures faster and more reliable read/write performance compared to TF card storage.
- Flexible Boot Options – Supports both USB flash drive booting and TF card booting, giving users versatile setup choices.
- Convenient Power Management – Direct DC power input without jumper caps, making the power supply connection simple and user-friendly.
- Onboard Control Buttons – Integrated Power and Reset buttons allow quick system operation and troubleshooting.
- Optimized Port Configuration – 1 × USB 3.0, 2 × USB 2.0, and 1 × CSI port provide necessary connectivity without excessive interfaces.
- Form Factor Compatibility – Carrier board design aligns with the official Jetson Nano 2GB Developer Kit, ensuring smooth integration into existing setups.
- Expandable Storage – Includes a TF card slot on the expansion board for additional storage flexibility.
- Optional Core Module – Can be paired with or without the Jetson Nano 4GB module, depending on project needs.
- Ideal for Practical Development – Suited for students, educators, engineers, and hobbyists who need a stable and simplified development platform.
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
In Stock
- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
Official Arduino Uno R3 SMD Microcontroller Board – A000073
In Stock
- Microcontroller board featuring an ATmega328P in an SMD package
- Provides 14 digital input/output pins, with 6 capable of PWM output
- Includes 6 analog input pins for reading sensor data
- Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
- Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
- Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
- The SMD Arduino Uno version of the popular Arduino Uno board
Arduino Uno R3 CH340G Development compatible Board with Micro USB port
In Stock
- This is the Uno R3 CH340G Development Board with Micro USB port compatible with Arduino
- This UNO R3 board is based on ATmega328p microcontroller.
- This board comes with a Micro USB port for powering the board.
- This board has an operating voltage of 5V and features a 14 digital I/O pins.
- The UNO board is integarted with 6 analog pins and 32Kb flash memory.
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
In Stock
- Module PCB size: 3.6cm * 2.3cm
- PCF8591 operating voltage range of 2.5V to 6V
- 4 analog inputs programmable as single-ended or differential inputs
- VCC power supply interface external 3.3v-5v
- 8-bit successive approximation A / D converter through an analog output DAC gain
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
In Stock
- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)
In Stock
- Equips you with robust Wi-Fi and Bluetooth capabilities.
- Can easily integrate into other products with 30-pin design.
- Choose between AP, STA, or AP+STA modes.
- The support for Lua programming simplifies development.
- This board includes a CP2102 USB-UART bridge.
- Powered by the ESP32S chip.
- Offers scalable and adaptive features with adjustable clock frequencies.
- Ideal for various applications.
Raspberry Pi USB Plug and Play Desktop Microphone
In Stock
- USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
- Designed to filter out background noises for crisp, clear audio
- Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
- Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
- Flexible neck to adjust your convenient direction and Height for talking.
Noel 25W 230V Sodering Iron Model-GOLD
In Stock
- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth
In Stock
- Operating Power: 5 V/2.5 A DC via micro USB
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Raspberry Pi Compute Module 4 I/O Board
In Stock
- External power connector (+12V, +5V)
- 2 x full-size HDMI 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- Micro USB socket for updating Compute Module 4
- PCIe Gen 2 x1 socket
Raspberry Pi 5 Model 8GB
In Stock
Raspberry Pi 5 Model 4GB
In Stock
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.