1
1 item
₹44,999.00
Subtotal: ₹44,999.00
Hurray! Your order qualifies for free shipping!
1
Subtotal: ₹44,999.00
Hurray! Your order qualifies for free shipping!
“CR 10 Smart 3D Printer” has been added to your cart. View cart
PAM 8403 Amplifier Module with Knob
In Stock
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
Soldron High Quality 75W/230V Soldering Iron
In Stock
- Brand: Soldron
- Output: 75 Watts
- Operating voltage: 110 to 230V AC
- Colour: Black-Green
- Bit tip Diameter: 7mm
Soldron High-Quality 230V/50W Soldering Iron
In Stock
- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth
In Stock
- Operating Power: 5 V/2.5 A DC via micro USB
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
OE-775 Hall Effect Two Channel Magnetic Encoder
In Stock
801S Vibration Shock Sensor Module
In Stock
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
Raspberry Pi Compute Module 4 I/O Board
In Stock
- External power connector (+12V, +5V)
- 2 x full-size HDMI 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- Micro USB socket for updating Compute Module 4
- PCIe Gen 2 x1 socket
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
Tactile Push Button Switch Assorted Kit – 25 pcs
In Stock
6 Flexible Arms Soldering Station With Swiveling Alligator Clip
In Stock
- Total Weight: 400 gm
- Each Arm length: 34 cm
- Alligator clip(L): 44mm (large size)
- Alligator clips maximum thickness limit: 6mm
- Built-in Trays for components and screws.
- 6 flexible arms each with a large swiveling alligator clip.
- 6+1 pockets in beautifully base to hold loose components.
- 6 Silicon clip tips for the ultimate heat resistance.
C-4 Soldering Iron Support Stand with Cleaning Sponge
In Stock
- Heavy duty metal base featuring a reinforced spring holder.
- Supplied complete with cleaning sponge.
- Dimensions: 130 x 88 mm
- Color: Black
Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light
In Stock
- A useful Aid for soldering work or model makers
- Battery required for light: 3 x AAA
- Adjustable crocodile holding clamps
- The bottom battery compartment is furnished with steel plate which can enhance stability
- Ideal when a third hand is needed
- With two LED lighting, this model can work very well in the dark environment
Soldron High Quality 100W/230V Soldering Iron
In Stock
- Attains full operating temperature within seconds
- Maintain constant tip temperature
- Low current leakage
- Safe for use on delicate components
- Maximum heat transfer efficiency
- Slide-on replaceable tips
- Cool Grip Nylon handle

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















