“Bambu Lab H2D- Combo 2 10W 3D Printer” has been added to your cart. View cart
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
PCA9685 16 Channel Servo Motor Drive
In Stock
- This is PCA9685 16 Channel Servo Motor Driver(Soldered)
- The operating voltage: 2.3V to 5.5V
- This has 5.5V tolerant inputs
- This can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
BTS7960B 43A H-Bridge Motor Driver
In Stock
- This is BTS7960B 43A H-Bridge Motor Driver
- Double BTS7960 large current (43 A) H bridge driver
- The supply voltage: 5.5V to 27V
- This has Overtemperature shut down with latch behavior
- This has Overvoltage lockout and Undervoltage shut down
- The Driver circuit with logic level inputs.
- This has an onboard 5V power indicator
- This has a driver circuit with logic-level inputs.
- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
NEO-6M GPS Module with EPROM
In Stock
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0
In Stock
- Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
- Supports Wi-Fi & Bluetooth 5.0 connectivity
- Built-in 2.4GHz rod antenna for a stable signal
- Ultra-low power consumption with deep sleep mode (14μA)
- Integrated lithium battery charging management
- Compact ESP32 S3 development board ideal for IoT and robotics
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
In Stock
- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio
In Stock
- Smart AI vision camera solution for edge AI applications
- Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
- Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
- Supports TensorFlow & PyTorch frameworks
- Compatible with Arduino IDE for easy development
- No-code model deployment and real-time inference visualization via SenseCraft AI
- Comes in a custom 3D-printed enclosure
Seeed Studio XIAO RP2040 Development Board Supports Arduino,
In Stock
- Compact and Arduino-compatible development board based on Raspberry Pi RP2040
- Thumb-sized, surface-mount design for space-saving applications
- Supports Arduino, MicroPython, and CircuitPython programming
- Ideal for learning coding, electronics, and prototyping
- Cost-effective solution with a wide range of compatible libraries
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++
In Stock
- Compact development board powered by Raspberry Pi RP2350
- Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
- Supports MicroPython, C, and C++ development
- 19 multifunction GPIOs, RGB LED, and Battery Management System
- Ultra-low power consumption (27μA) with battery power supply
- Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0
In Stock
- Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
- Bluetooth 5.0
- Wireless connect
- Onboard 2 MB flash
- Embedded machine learning projects
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.