19
19 items
₹26,593.00
Subtotal: ₹26,593.00
Hurray! Your order qualifies for free shipping!
19
Subtotal: ₹26,593.00
Hurray! Your order qualifies for free shipping!
“IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi” has been added to your cart. View cart
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
RS385 385 High Speed 12V – 24V 10000RPM – 20500RPM DC Motor
In Stock
- Speed: 10000 RPM
- Rated voltage: 12(V),
- Rated current: 0.15-0.75 (A).
- Rated speed: 10000 (rpm)
- Rated Torque: 70 (g. cm).
- Shaft Type: Round
- shaft Length: 13mm
- shaft Diameter: 2mm
- Motor Length: 56mm
- Motor Diameter: 27mm
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
PAM 8403 Amplifier Module with Knob
In Stock
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
MAX7219 8×8 LED Dot Matrix Display Module
In Stock
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
TM1637 4 Bits Digital Tube LED Display Module
In Stock
MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
In Stock
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCB Dimensions: 128×32 (LxW) mm
DC 24V 7000RPM 38mm Diameter Permanent magnet Geared full copper industrial grade PMDC Brushed Motor
In Stock

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















