Filter
Sort:
220V AC 2000W SCR Voltage Regulator Motor Speed Controller

220V AC 2000W SCR Voltage Regulator Motor Speed Controller

Original price was: ₹149.00.Current price is: ₹76.00.
In Stock
SKU: AE1020
  1. This is 2000W 220V AC Motor Speed Controller Voltage Regulator
  2. This voltage regulator uses novel bi-directional high-power SCR.
  3. The input voltage of this voltage regulator can be between 110V ~ 220V AC
  4. The output voltage:50V-220V(Output voltage < = Input supply voltage)
  5. The maximum output power is 2000W and the maximum output current is 25A
  6. The size of this SCR is 1.85x1.38x1 inches
  7. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  8. This has High efficiency, high torque, low heat generating
Add to cart
SD Card Module

SD Card Module

Original price was: ₹59.00.Current price is: ₹37.00.
In Stock
  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
  • Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
  • MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
Add to cart
5V 16 Channel Relay Module

5V 16 Channel Relay Module

Original price was: ₹720.00.Current price is: ₹526.00.
In Stock
  • Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
  • Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
  • Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
  • Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
  • Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
  • Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
  • Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
Add to cart
12V 4CH Relay Board

12V 4CH Relay Board

Original price was: ₹245.00.Current price is: ₹143.00.
In Stock
  • Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
  • Electromagnetic relays are employed for the protection of various ac and dc equipment.
  • The over/under current and voltage protection of various ac and dc equipment.
Add to cart
2 CH 12V Relay Board

2 CH 12V Relay Board

Original price was: ₹99.00.Current price is: ₹74.00.
In Stock
  • The board is a 2 channel relay which works on 12V.
  • The input signal can come directly from a microcontroller.
  • Each relay can switch the variety of AC or DC high voltage.
  • Current loads working at 110V or 220V AC mains like lights, fans, motors and such
Add to cart
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

Original price was: ₹69.00.Current price is: ₹37.00.
In Stock
  1. Voltage: 3.3 – 5V.
  2. Ports: Digital Level.
  3. Output load voltage: 0-24 V.
  4. Output load current: <5A (1A above need to add heat sink).
  5. Platform: Arduino, MCU, ARM, raspberry pi.
Add to cart
5V Single Channel RELAY Module

5V Single Channel RELAY Module

Original price was: ₹59.00.Current price is: ₹31.00.
In Stock
  1. ontrol Signal: Works with 5V TTL signals.
  2. Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
  3. Relay Rating: Supports 5A at 240V AC.
  4. LED Indicator: Shows when the relay is ON.
  5. Wiring: 2×3-pin male header for easy connections.
Add to cart
7Semi Mini ATmega328P Board – 5V

7Semi Mini ATmega328P Board – 5V

Original price was: ₹299.00.Current price is: ₹225.00.
In Stock
  1. Microcontroller: ATmega328
  2. Circuit Operating Voltage: 5V
  3. Clock frequency: 16MHz.
  4. Digital I/O Pins: 14
  5. 8 analog input port: A0 ~ A7.
  6. A pair of TTL level serial port transceiver : RX / TX.
  7. 6 PWM port: D3, D5, D6, D9, D10, D11.
  8. Support serial download.
Add to cart
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Original price was: ₹1,999.00.Current price is: ₹1,212.00.
In Stock
Add to cart
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Original price was: ₹249.00.Current price is: ₹192.00.
In Stock
  1. Operating Voltage (logic level): 5V
  2. 8 analog inputs ports: A0 ~ A7
  3. 14 Digital input / output ports: TX, RX, D2 ~ D13
  4. 1 pair of TTL level serial transceiver ports RX / TX
  5. Using Atmel Atmega328P-AU MCU
  6. There is a bootloader installed in it
  7. Standard 0.1” spacing DIP (breadboard friendly).
  8. Manual reset switch.
Add to cart
UNO Based ESP8266 Nodemcu Development Board

UNO Based ESP8266 Nodemcu Development Board

Original price was: ₹299.00.Current price is: ₹230.00.
In Stock
  1. Based on ESP-8266EX.
  2. Arduino compatible, using Arduino IDE to program.
  3. Support OTA wireless upload.
  4. Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
  5. The direct use of Arduino IDE development, the same operation with Arduino UNO.
  6. Operating Voltage: 3.3V
  7. Digital I/O Pins: 11
  8. Analog Input Pins: 1
Add to cart
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

Original price was: ₹499.00.Current price is: ₹346.00.
In Stock
  1. Microcontroller: ATmega168 or ATmega328V
  2. Operating Voltage: 2.7-5.5 V
  3. Digital I/O Pins: 14
  4. PWM Channels: 6
  5. Analog Input Channels: 6
  6. DC Current per I/O Pin: 40 mA
  7. Board will run from 2V to 5V.
  8. The latest version of the LilyPad supports automatic reset for even easier programming.
  9. The back side of the LilyPad is now completely flat!
Add to cart
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Original price was: ₹1,459.00.Current price is: ₹1,334.00.
In Stock
  1. Microcontroller: ATmega2560
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 6-20V
  5. Digital I/O Pins: 54 (of which 15 provide PWM output)
  6. Analog Input Pins: 16
  7. DC Current per I/O Pin: 40 mA
  8. DC Current for 3.3V Pin: 50 mA
Add to cart
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

Original price was: ₹1,549.00.Current price is: ₹1,197.00.
In Stock
  1. Microcontroller CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. Dimensions : 111 x 54 x 12 (LxWxH) mm.
Add to cart
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino

Original price was: ₹349.00.Current price is: ₹217.00.
In Stock
  1. Microcontroller ATmega328 (SMD) – Interface CH340G
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 5-20V
  5. Digital I / O Pins 14 (of which 6 provide PWM output)
  6. Analog Input Pins: 6
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹410.00.
In Stock
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart

Filter Products

Categories

Filter by price

Product Status